E30-LS1 KITS now available!

[Madhatter]

also interested.

[RGCintha29073]

Im interested in a kit. PM sent

[The Dark Side of Will]

Every thing works except the SI service interval lights,

The GM computer does have an oil life monitor... On older models there's an independent tell-tale light for "oil change needed"; not sure about LS1's.

[garretvs]

I'm interested, but have to do a little more research first.

I need to know a little more about the electronics... the PCM, gauges, sensors... Do you use the e30 PCM as it is OBD2?

No, the BMW ECM goes away entirely. The GM PCM (Powertrain Control Module) controls the new engine, in OBD2. Every thing works except the SI service interval lights, and the mpg functions of the little computer module.

A/C, cruise control work normally. The GM PCM controls the EVAP system and emissions related O2 sensors, etc. The GM PCM controls the tach and fuel pump and cooling fans. On our '86 325es, five wires from the new engine go thru the round plug by the fusebox, and 8-9 wires go from the GM PCM to the MIL light, control of emissions, etc. Everything is detailed in the CD. Piece of cake.

[carlb]

I'm interested, but have to do a little more research first.

I need to know a little more about the electronics... the PCM, gauges, sensors... Do you use the e30 PCM as it is OBD2?

No, you'll use the LSx PCM or an aftermarket unit if so inclined.

[carlb]

Garrett, I emailed you about the kit. I'll send another email to buy the CD to tie me over until you make another run. Thanks.

[POPtheoriginal]

I'm interested, but have to do a little more research first.

I need to know a little more about the electronics... the PCM, gauges, sensors... Do you use the e30 PCM as it is OBD2?

[andy_2123]

Two days after finding out you're out of kits and there are already 4 interested. Do you need 10 people on board before you make another batch?

[ATLe30]

ill need one shortly. a kit that is. soon as my s52 sells

[TurboSam]

Yes, we're still here ... we have sold the last of our run of ten kits. We may do another run of ten ... show some spark! otherwise, we do have CD's for the DIY guys, or those who want to know what is involved in doing our swap.

I'm in for one.

[garretvs]

Yes, we're still here ... we have sold the last of our run of ten kits. We may do another run of ten ... show some spark! otherwise, we do have CD's for the DIY guys, or those who want to know what is involved in doing our swap.

[carlb]

I'm interested. He hasn't responded to my email, however. So, that's two.

Sent from my PI39100 using Board Express

[andy_2123]

Just got a message from him saying they recently sold the last kit. Let's get some interest going so they'll make another round of them!!

[The Dark Side of Will]

Perhaps the wrong thread, but what options are there for getting more traction and increasing durability in the rear?

Dual mounting ear E36 rear diff cover.

I'm not sure if you can use the 94mm output flanges from an M30 car, or if there are axles that will work with those flanges in the E30 suspension.

[andy_2123]

How many kits do you have left? Trying to order one today