Definitely 3 pins on the IE race hood!!!! I ran one for a few races and I have a picture somewhere where mine is all bowed up. I thought it was going to come off the car so I had to tape the leading edge.
-
-
hmmm, interesting.Comment
-
Wow, I'm definitely going to use this.Originally posted by !kid View Postfound this when i searched (this is not my car)
Originally posted by StereoInstaller1Comment
-
wow this solves all my problems of making my own fiberglass/CF hood!! sweet thread!No more e30s for me.
88 black BMW OBDII 332is dedicated track [sold]
88 BMW OBDII bronzit 332is [RIP 03/08]
91 BMW 325i [sold]
86 Corolla 'Ae86' HB 20v trd [sold]
http://youtube.com/watch?v=pTj7Hn9v5RsComment
-
I had a IE race hood on my black car with 2 pins on the radiator support. I added a rib across the front to reduce flex and glassed the stock rear mounts on.
worked just fine over 100mph
Comment
-
Great Link and reference. Hope its that easy to install a set. How much do they run?
Originally posted by kishg View PostComment
-
turner Motorsports has them for 80.00$ a pair. I am sure they can be had for cheaper.:borg:Comment
-
On my car I have the stock stuff at the back and just two pins on the leading edge. Still the stock hood. No flexing, buckling.
Cheers
Tino92 Opel Monza CLi 200i8v Exec
92 Opel Rekord 380GSiV6
87 BMW E30 335i (M30B35)
91 BMW E34 520i (M50B20) with Mtech Turbines
95 Hyundai Elantra with Mitsu 4G63
Three Aircooled VW Beetles
17.8Litres, 38cylinders, 10Cams and 84valves
Comment
-
ebay.. $10.. my friend has been running them in his 240 for like 3years.Originally posted by !kid View PostNo more e30s for me.
88 black BMW OBDII 332is dedicated track [sold]
88 BMW OBDII bronzit 332is [RIP 03/08]
91 BMW 325i [sold]
86 Corolla 'Ae86' HB 20v trd [sold]
http://youtube.com/watch?v=pTj7Hn9v5RsComment
-
You ghuys should look up Kish 's e30... really nice hood pin installation! And look allot better!sigpic
1986 "C2 2.7 Alpina" Sedan
1987 325ic Black Vert
1986 327i Red Track Car RIP 10/10/10
1989 325is Henna S50 track car SOLD
Transaction feedback here please!!
http://www.r3vlimited.com/board/showthread.php?t=170548Comment
-
Anyone have pics for the trunk??? I'm most interested in location of the plates/pins and how you attached them - I need to go this route since my trunk latch is mostly inop and I'm not buying a new one for chumpcar....
Those aero-latches are sweet.
Word of caution. If you go with regular 'torsion' style pins, stay away from the Mr. Gasket ones. Cheap, and you get less than you pay for. The torsion spring/loop doesn't work to hold the pin in place. I should have just bought the captive ones like on the white car that !Kid posted. Those work great.Ben
Thelma-Louise, the '88is Chump Car - back to M20 power!
2014 ChumpCar Season Schedule!
April 5-6 Autobahn, IL - Sat: 1st! Sun: 3rd
May23-25 Watkins Glen, NY: 4th, 5th, 4th
October 4 PittRace Sprints: 2nd in C-class
October 18-19 NCM, Bowling Green KY: 2nd, 1st!
Nov 1-2 Watkins Glen - Chumpionship - 1st car to exit the race with significant body damage :(
Find us on FB! Schaut Speed MotorsportsComment
-
10$ flush mount hood latches! sounds to good to be true?Originally posted by etxxz View Post:borg:Comment
Comment