Announcement

Collapse
No announcement yet.

Need some Harness advice

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • djjerme
    replied
    Same here. Just make sure you use the biggest fender washer you can find or some spare steel with a hole drilled in it welded to the floor under the trans tunnel where it pokes through.

    Leave a comment:


  • matthugie
    replied
    Originally posted by JRKOUPE View Post
    mine's drilled thru trans tunnel..
    Same. Outside mounted in the stock belt locations.

    Leave a comment:


  • JRKOUPE
    replied
    mine's drilled thru trans tunnel..

    Leave a comment:


  • GThomas
    replied
    Anyone have any tips on mounting the inside lap belt? Could I mount it to the Vac mount?

    Leave a comment:


  • djjerme
    replied
    When in doubt, check out one of the rule books for a racing organization. They usually will break it down for you. SCCA and NASA have good sections on belt routing and what not. The areas to pay attention are:

    -The angle of the upper belt from your shoulder/seat to the harness bar
    -the angle of the anti-sub belt from the mount through the seat.
    -looping the belts through the adjuster, the anchor or around the bar and back through the adjuster.

    Once you get the hang of it, try uninstalling and reinstalling them a couple times. It doesn't take long to get quick at threading them, and it will help you set them up correctly for whatever size driver is in your car.

    Also, make sure to set them snug in your lightest street clothes, then they will be very snug in your race suit (which is what you want...)

    Leave a comment:


  • M-technik-3
    replied
    We run G-force as well in our lemons rat. No complaints.

    Leave a comment:


  • Chriskbmx
    replied
    thanks guys, I can understand anything, just finding the right info can be tough.

    Leave a comment:


  • TobyB
    replied
    no naked girl, huh....

    t

    Leave a comment:


  • FLG
    replied
    Originally posted by JRKOUPE View Post
    tonsa info online......tons dude.

    get all your angles right.......

    gforce site


    schroth site etc...

    apex racing

    saferacer
    That too. Schroth has a lot of info on YouTube.

    Sent from my SCH-I545 using Tapatalk 2

    Leave a comment:


  • JRKOUPE
    replied
    Originally posted by Chriskbmx View Post
    can someone post a link for how to install the belts properly?
    tonsa info online......tons dude.

    get all your angles right.......

    gforce site


    schroth site etc...

    apex racing

    saferacer

    Leave a comment:


  • FLG
    replied
    Originally posted by Chriskbmx View Post
    can someone post a link for how to install the belts properly?
    Chris if I get some time I can take some pics for you. It's not terribly hard.

    Sent from my SCH-I545 using Tapatalk 2

    Leave a comment:


  • Chriskbmx
    replied
    can someone post a link for how to install the belts properly?

    Leave a comment:


  • TobyB
    replied
    Did they come with a naked girl?

    I always hoped they would, but not enough to buy the harnesses.

    t

    Leave a comment:


  • GThomas
    replied
    I ended up going with the 6 point Racequip belts. Really like them.

    Leave a comment:


  • kingston
    replied
    The Safecraft stuff looks like the ticket for me. Great thread - thanks guys!!

    Leave a comment:

Working...
X