Jongbloed 15x10 On Track Car

[team9]

Any videos from the track weekend Rocco?

[MX339]

That wasn't me, but both of them put a wheel on the paint coming down into turn 12 which is a no-no in the wet. Rob in front caught it, Jeff did not.

[iwantspeed]

right before you spun the car in front of you seemed to be driving relatively straight maybe pointing a little to the right and he got loose all of the sudden maybe some oil?

[MX339]

A couple of years back there was an Odyssey racing in our run group with NASA at RdAtl; I think it had some sort of Honda Racing support, and was really nicely prepared. In a straight line it left my spece30, but it was thankfully slow in the corners (getting beat by a minivan would have sucked!).

It's still around. It was built by a bunch of engineers from the Honda plant out in Alabama, and this past year it was significantly improved over the stock engined and automatic transmission equipped one they ran in the past. Now has a screaming engine and a 6spd sequential. Here it is getting plowed into by a SE30.

[GillesBigCowboy]

A couple of years back there was an Odyssey racing in our run group with NASA at RdAtl; I think it had some sort of Honda Racing support, and was really nicely prepared. In a straight line it left my spece30, but it was thankfully slow in the corners (getting beat by a minivan would have sucked!).

But back to the subject at hand, Rocco. We all see how nice this setup looks, but what about performance: do you feel like this wheel/tire setup gave you some real measurable (or significant) performance gains?

[Hooffenstein HD]

Hahaha! That Odyssey is caged and on Rcomps....

The Honda crowd are a strange bunch.

[Wh33lhop]

looks great! more pics from everyone. give me some vicarious livin'.

[RoccoB517]

Hahaha! That Odyssey is caged and on Rcomps....

[FunfGan]

Hold up going to need more info on that Odyssey in the background, please tell me it hit the track

[HennaE30]

Dude that's sexy as fuck.

What front valence/bumper is that?

[RoccoB517]

Here you go.

15x10
245/40r15 Hoosier R6's
DTM Flares
25mm spacers Rear
20mm spacers Front
Motorsport Hardware holding them on.

[tinkerputzer]

Thanks, tread width is different than section width though. I'm guessing the tread width will end up around 9" or so but every manufacturer varies a bit.

[robgoesvroom]

What is the actual measured tread width on those 245/15 rc1's?

According to Maxxis 9.8" section width

vs 225 RS3 at 8.9"

[tinkerputzer]

What is the actual measured tread width on those 245/15 rc1's?

[robgoesvroom]

This is the ET15 wheel fit with no spacers?

20mm spacers and 15mm spacers