Gauge pod options...

[namsayin]

Never have seen one I would consider mounting in my car. I have a Zender 3 pod that goes on the dash. Much like the old taxi unit audi's had.

pics?

[M-technik-3]

Never have seen one I would consider mounting in my car. I have a Zender 3 pod that goes on the dash. Much like the old taxi unit audi's had.

[namsayin]

just be forewarned that the center console/ash tray are not great places for gauges, visually. the ash tray gauges are blocked by the shifter most of the time, and in either location you have to look down and away from the road to see them. if you are doing this for a track car, the center vents, a-pillar or custom mount on top of the dash are best.

does anyone make a steering column 2 gauge pod piece?

[nando]

just be forewarned that the center console/ash tray are not great places for gauges, visually. the ash tray gauges are blocked by the shifter most of the time, and in either location you have to look down and away from the road to see them. if you are doing this for a track car, the center vents, a-pillar or custom mount on top of the dash are best.

[namsayin]

^ thank you sir!

where am i able to purchase that?

[M-technik-3]

BMP or make it yourself out of sheet stock and cover it with vinyal.

[namsayin]

anyone know where to get this one?

[SS350]

Gauge pod (Autometer PN#2204) to the Steering Column upper cover. I placed mine in the 10o'clock and 12o'clock (in front of the speedometer).

Have a picture of that head on??

thanks

[SS350]

3 gauge pod


2 gauge pod

Bringing this thread back b/c I'd like to see the modified 3-pod!!!! If you still have the picture - thanks

suppose you could just add a single cup on...

or mold one in

[smonkbmw]

OP, i have a metal plate style gauge holder like this one /\ that holds 3 gauges. you can have it for $25 shipped. if you would like pics pm me.

[drivnvordaedge]

how i have it ... i dont remember where i bought the precut panel ... but yeah ...

it does need some fitting as well as a need of a way to completely mount in and not slip out ...

idk ... ill think of something

[bmwpower]

Anyone have a picture of the BMP pod installed? Looks like it would stick the gauges out a little more. Might be easier for viewing. $90 is hard to swallow though.

[gearheadE30]

Hey rwdrift, do you have any pics? I was thinking the same thing after seeing it in an STi but didn't know how it would look.

[kishg]

here's my setup. vdo guages with vdo angle rings (nla) and the blank from a guy on e30tech. works well. i think i'll remove the radio and get a blank for a a water temp guage in there.

[Erick]

Gauge pod (Autometer PN#2204) to the Steering Column upper cover. I placed mine in the 10o'clock and 12o'clock (in front of the speedometer).