car reluctantly for sale

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mcr_driver
    R3V Elite
    • Mar 2009
    • 4491

    #1

    car reluctantly for sale

    well i recently took my 87 325is,AW, 5 speed with about 187.6k miles, to the m shop in eagle rock for what i thought was going to be just a leak down and pressure test...

    unfortunately there were several other things wrong with the car that have forced me to sell it as a fixer upper.

    the list of items wrong with the car are FCAB's gone, camshaft seal leaking, engine and tranny mounts shot, radiator cracked, wrong radiator hoses (the work done for the radiator was done with aftermarket hoses worked around improperly unfortunately this was the only e30 i saw so i made the mistake of assuming that was how the piping looked...), front brake pads are low (was going to get a bbk after e46 sold), shocks are getting worn out (probably due to aftermarket springs but i was gonna get coilovers after e46 at anyrate), leak where oil filter is installed (easy fix i was gonna do at next oil change in like 1.5-2k miles), found some bondo work on rear passenger side (did see that honestly when i saw the car)

    so all in all a tough lesson to learn. now i wish i could fix the car up as some of the stuff is pretty easy to fix however i don't have the tools or time or space to do such lengthy repairs myself.

    right now the car runs rather well considering the work needed i will try to get pics this weekend as i don't have a P&S currently. the car is being offered at 1750.00 OBO. the car is available for viewing, test driving as well but i'd like to avoid any unneccessary wear and tear at this point, in the san gabriel area feel free to pm me contact info or if you want my address etc.
    Attached Files
    Last edited by mcr_driver; 12-06-2009, 11:11 PM.

  • cyberkaa
    E30 Mastermind
    • Jun 2009
    • 1698

    #2
    Sorry to hear about all the troubles. GLWS.
    -Kalim

    British Racing Green, IE Springs/Bilsteins, IE exhaust, IE SSK,
    Momo shift knob, Miller MAF conversion, K&N intake,
    Blackworks Aluminum Radiator, 5MT swapped,
    Ellipsoids w/DDM HIDs, OEM Recaro Sports, Momo Mod07 Wheel,
    Drilled+Slotted Rotors, Alpine HU/Amp/speakers, 12" enclosed sub

    Comment

    • -Jay-
      Noobie
      • Jun 2009
      • 12

      #3
      GLWS Matt.


      maybe u should post some pics up?
      jussayin. :)
      -Jay-

      Comment

      • mcr_driver
        R3V Elite
        • Mar 2009
        • 4491

        #4
        you and kalim both need to read jay :rofl: hopefully i can get a P&S asap to get proper pics up.

        some +'s for the car are aside from it being a 5 speed IS is that it has a racing dynamics rear bumper new cat installed i have OEM software and injectors but the car came with larger 19lb injectors and racing software (not sure what brand honestly) new valve cover gasket installed and new spark plug wires installed, odometer works as well as all gauges dash is pretty clean i have yet to see any cracks on it. dif is stock 325is LSD, had some recent work done on driveshaft and bearings (have reciepts for proof) new front windshield sunroof works perfectly. despite rear bondo work car is a straight chassis so impact must have been a low speed one. tires need to be replaced soon on 3/4 rims but the rims are BBS RA's and comes with a full bottle cap spare.
        Last edited by mcr_driver; 10-14-2009, 10:16 PM.

        Comment

        • robrez
          No R3VLimiter
          • Jul 2008
          • 3376

          #5
          Sorry to hear about the car troubles. An '87 325iS is a pretty special car, so think long and hard about bailing on it. The M Shop is a great shop and I'm sure they did a thorough job in diagnosing it, but yeah, I kind see it getting pretty spendy to have them to all the work.

          If you don't have the time/resources/ability to get the work done yourself, consider taking your car to a shop that's willing to discount it's rate for bulk/interconnected work. No guarantees, but I'd bet that E30 Motor Werks could get the work done for a lot less than you'd expect. Or try BMW PHD Motorsports in Pasadena. It's a new shop, but the owner has tons of experience and he owns an e30 too. Good luck.
          sigpic
          January 2012 COTM

          Comment

          • lifeiskaos
            E30 Mastermind
            • Dec 2007
            • 1709

            #6
            Originally posted by robrez
            No guarantees, but I'd bet that E30 Motor Werks could get the work done for a lot less than you'd expect.
            That's for damn sure. His prices are very reasonable and he does great work.

            Comment

            • mcr_driver
              R3V Elite
              • Mar 2009
              • 4491

              #7
              isn't e30motorwerks in arizona? probably have to have the car towed there which would be $$$ in itself...i honestly just need a place to work , lift, tools, etc. i can DIY most of it myself just the engine/tranny mounts and camshaft seals are the biggest reasons for me honestly...

              thank you guys for the input

              Comment

              • robrez
                No R3VLimiter
                • Jul 2008
                • 3376

                #8
                Originally posted by mcr_driver
                isn't e30motorwerks in arizona? probably have to have the car towed there which would be $$$ in itself...i honestly just need a place to work , lift, tools, etc. i can DIY most of it myself just the engine/tranny mounts and camshaft seals are the biggest reasons for me honestly...

                thank you guys for the input
                Dood, where did you get Arizona from I was talking about the http://www.e30motorwerks.com/index/ in Bangalor. You'd need to have it flown in on a transport plane so factor that into the cost
                sigpic
                January 2012 COTM

                Comment

                • lifeiskaos
                  E30 Mastermind
                  • Dec 2007
                  • 1709

                  #9
                  Originally posted by robrez
                  Dood, where did you get Arizona from I was talking about the http://www.e30motorwerks.com/index/ in Bangalor. You'd need to have it flown in on a transport plane so factor that into the cost
                  = e30motorwerks is in huntington beach, california ;)

                  Comment

                  • e30trooper
                    R3V OG
                    • Mar 2009
                    • 11576

                    #10
                    how much and where did you get a windshield? mine just got a HUGE crack, i need it changed ASAP like tomarrow , pls let me know thanks!!

                    Comment

                    • IRON-E
                      I waste 90% of my day here and all I got was this stupid title
                      • Dec 2007
                      • 16548

                      #11
                      Originally posted by e30trooper
                      how much and where did you get a windshield? mine just got a HUGE crack, i need it changed ASAP like tomarrow , pls let me know thanks!!
                      C'mmon Ben, that's too easy.
                      @IRON-E30 aka Edwin:D

                      Comment

                      • lifestyle101
                        E30 Addict
                        • Jun 2008
                        • 552

                        #12
                        Originally posted by e30trooper
                        how much and where did you get a windshield? Mine just got a huge crack, i need it changed asap like tomarrow , pls let me know thanks!!
                        wtf!!
                        sigpic

                        Comment

                        • e30trooper
                          R3V OG
                          • Mar 2009
                          • 11576

                          #13
                          Originally posted by lifestyle101
                          wtf!!
                          i started a thread on it haha, but all is good now, i just need a windshield asap, i dont have a phone today, pmme

                          Comment

                          • mcr_driver
                            R3V Elite
                            • Mar 2009
                            • 4491

                            #14
                            not sure it was done before i got the car i can see if i can read the receipt later when i get home :rofl:

                            my bad i guess i was thinking of someplace else

                            Comment

                            • e30trooper
                              R3V OG
                              • Mar 2009
                              • 11576

                              #15
                              all good i got it changed today, 95bux

                              Comment

                              Working...