SoCal General Chat

[IRON-E]

Ok, so from the looks of your set up, there shouldn't be any rubbing at all. You're set up like that GRAVEDIGGER monster truck. :giggle:

In all seriousness though, maybe the rubbing is all inside the wheel well?, if that's the issue you only need small 3-5mm spacers.

[IRON-E]

I quoted you ... NO expert!

Jackass.........:rofl:

[Zasz]

Any of you bros got 15" RS centercaps, center nuts, waffles, etc?

[tightithrash]

Ok, so from the looks of your set up, there shouldn't be any rubbing at all. You're set up like that GRAVEDIGGER monster truck. :giggle:

In all seriousness though, maybe the rubbing is all inside the wheel well?, if that's the issue you only need small 3-5mm spacers.

haha i know man its a monster truck right now.

check out my shocks though.... rub fest its so annoying.





^right side rubs ALOT.

[einstein57]

Thats just a dust cover. You can remover them. I'd say you don't need spacers in the rear at all untill you roll the renders and even then...... If they are 17x9 et 35 Then you can get away with 25mm spacers with a roll. Also since you have an early model the h&r races are still going to leave you with pretty big wheel gap. I say go coils. :hitler:

[tightithrash]

Thats just a dust cover. You can remover them. I'd say you don't need spacers in the rear at all untill you roll the renders and even then...... If they are 17x9 et 35 Then you can get away with 25mm spacers with a roll. Also since you have an early model the h&r races are still going to leave you with pretty big wheel gap. I say go coils. :hitler:

Ok. I should just smack it with a hammer then lol

Still wheel gap...? Shiiiit.... Cut a coil out of the spring then maybe? Coils are pretty expensive right?

[einstein57]

About the same price as a new set of h&r races.

[tightithrash]

Link?

[aje28]

Any of you bros got 15" RS centercaps, center nuts, waffles, etc?

I have e34 15inch bbs basketweaves center caps, not sure if that's what you're looking for as well.

[ak-]

Smacked a piece of my inner fender today with success. No more rub.
And a 15mm spacer will work for you tighitrash

[Robert]

sup

[yert315]

Got half of my manual swap parts! I'm excited :D

[Robert]

FUCK YES!

Trey, let me know when you're going to do it. I can lend you a hand. ;)

[yert315]

It will be a while. Can't drop $500 on a clutch right now.
Shit I still need to smog and register the thing!

[mkcman17]

Found some metal bumpers.