SoCal General Chat

[nickflic3]

http://inlandempire.craigslist.org/pts/3909707395.html

Paging Nigel lol Have these on our acura and so far they are quite good

[mcskibadee1]

Hey guys, anyone in the valley running a Miller maf on their m30 b35 engine? I am in north hills and car isn't running and have been searching this problem for 2 weeks now and think it might be the maf. If you could swing by my place I will throw you some cash or beer etc. Please help!

Call or text me 3109804583 or message me. Thanks

[Herr Faust Schinken]

is it just not starting or is it running like crap

[mcskibadee1]

Running like crap, idle is horrible. I have the radiator out so I can't drive it anywhere.

[Herr Faust Schinken]

Running like crap, idle is horrible. I have the radiator out so I can't drive it anywhere.

hmm one of my friends cars started having some issues with its m30b34 stroker, and its run by a miller maf + a war chip, we are going to start trouble shooting soon if we find anything that could help you ill report back. was it like lurching at part throttle, hard starting etc?

[mcskibadee1]

Starts fine, revs up and then just dies to around 500rpm jumping around. If you give it throttle it revs up fine. I unplugged the maf and it was much better but I'm not sure if it's the maf or unplugging it is just putting a band aid on the real problem.

If I come up with it first I will let you know as well.

[JFarhanbod]

Sounds like my 6, the problem with mine is one of my spark plugs holes is stripped. Check your plugs and wires and see if that helps

[E30_Pare]

maf cleaner & duct tape on elbow.

[Herr Faust Schinken]

Starts fine, revs up and then just dies to around 500rpm jumping around. If you give it throttle it revs up fine. I unplugged the maf and it was much better but I'm not sure if it's the maf or unplugging it is just putting a band aid on the real problem.

If I come up with it first I will let you know as well.

hmm hopefully we can start trouble shooting soon, are you sure you dont have any vac leaks

[mcskibadee1]

Trey has helped me and we have gone through EVERYTHING. Wires, plugs, injectors, icv, cps, main relay, timing, new battery and I'm sure I'm missing stuff.

I did have one cracked hose but I replaced it and it was still the same.

[flash 23]

Who wants to buy a mint condition 205/45/16 federal 595 SS? Also two 205/50/16 falken ziex (fair thread left). PM me if interested. Located in LB or Anaheim

[JFarhanbod]

Trey has helped me and we have gone through EVERYTHING. Wires, plugs, injectors, icv, cps, main relay, timing, new battery and I'm sure I'm missing stuff.

I did have one cracked hose but I replaced it and it was still the same.

Well damn. Maybe try a stock afm and chip?

[aje28]

Trey has helped me and we have gone through EVERYTHING. Wires, plugs, injectors, icv, cps, main relay, timing, new battery and I'm sure I'm missing stuff.

I did have one cracked hose but I replaced it and it was still the same.

Have you checked the wires that you have to splice into to give the maf voltage? or it could be the ecu? Just some ideas. Had the same problems when I had the Miller MAF on my b35.

[E30_Pare]

I WANT TO BE A BOOB ADJUSTER

[ninety4e36]

Morning R3V

Off in 2 hours!!