Any HID pros near San Jose?

[craiggroves91]

This guy does everthing real nice.

http://www.r3vlimited.com/board/showthread.php?t=132990

I know ive seen that but i believe its different than hella smilies

[T Verdier]

I know ive seen that but i believe its different than hella smilies

Smilies is just a nickname right? Because they have a little smilie mouth. He has euro ellipsoids which I believe are euro smilies.

I have us ellipsoids, I used to have sealed aswell.
I thought that there were only
euro ellipsoids
us. ellipsoids
sealed beams
and those rare euro buckets that look similar to sealed but have a seperate bulbs

[craiggroves91]

Smilies is just a nickname right? Because they have a little smilie mouth. He has euro ellipsoids which I believe are euro smilies.

I have us ellipsoids, I used to have sealed aswell.
I thought that there were only
euro ellipsoids
us. ellipsoids
sealed beams
and those rare euro buckets that look similar to sealed but have a seperate bulbs

Hmm not sure
Mine are Hella Euro Smilies Ellipsoids
I think the back caps are different
Dont know how well you can see but here is a picture i took a little bit ago

[T Verdier]

Those are the same as clavinzero's. He doesn't have pics of the headlight holes being drilled just the fog light caps

[craiggroves91]

Those are the same as clavinzero's. He doesn't have pics of the headlight holes being drilled just the fog light caps

Hmm I see. Did he drill out the female part where the pigtails plug in and have the stock wires come through there?
Pics would totally clear up everything with a DDM kit and headlights similar to mine

[craiggroves91]

i need these yellow guys right?!?!

[T Verdier]

The us ellipsoid system is different.
I'm gonn get clay to chime in on this.

[einstein57]

Sorry for the crappy, dirty, late pics but this should do it. Just use female bullet connectors for the high beams.




Solder and shrink wrap are your friends. If you don't have one get it from the 99cent store.





I like to mount my ballast underneath for a clean look. My ballast came with a metal cage. I just used one of the existing holes to bolt it up.

[craiggroves91]

I was wondering if it would work if i solder the stock wires right onto the prongs that are in the cap where the plug would go and spliced the HID wires to the stock wires inside?