NOR-CAL General Chat.

[Cabriolet]

Wake up bitches!

been up. cooked breakfast and cleaned. sup?

[mbonanni]

Well, my sister bought a house this weekend, and little time was left to work on the car, so the motor did not go in. If my dad did not want to help put it in I could have had it in, but he wants to be the one to tighten the bolts.

I did change out the odo gears on my black car. I need to fill it up and see how much I get off a tank.

My dad also checked the valves this morning and said they were exxtremely tight on #2 (where the misfire is). Wondering if that is athe problem, cause we checked for spark and compression, both of which are good.

How do you guys check for fuel?

[Cabriolet]

My dad also checked the valves this morning and said they were exxtremely tight on #2 (where the misfire is). Wondering if that is athe problem, cause we checked for spark and compression, both of which are good.

How do you guys check for fuel?

there is a hot and cold spec. make sure it was checked right. too far one way or another and it wont even run.

get a fuel pressure tester. ~$15

[Pantless Spency]

so bored....
schmobber idk how your gonna survive your ankle, i cant even stand being home just for the past 24 hours.

[mbonanni]

We adjuated it to .25mm, .010 inch, while it was cold.

My dad just redid it and the car no longer has a shake, and the valves are quiet for the most part. All is fixed. Thanks guys.

I'm bummer the motor didn't get put in the four door /:

[paperclip]

Dying to find a donor car...

[e30shmobberr]

yay my friend got his first feature! was reading through his list of parts, and realized he has 2 parts from my cousin's company (lol small world).

anyways...thought id share

http://www.thirdworldsociety.com/bagged-boosted-and-oh-ya-gold/

[mbonanni]

I wouldn't say it is perfect fitment, but still looks good.

[e30shmobberr]

I wouldn't say it is perfect fitment, but still looks good.

for 11 in wide on an a4, id say its damn close haha

[mbonanni]

Yeah, not perfect. lol

Still looks good. I like the look of audis

[Cabriolet]

fixed dane's ride. his friend hit an animal... parts of it were still stuck on the control arms.

i love doing tie-rods bc you dont get dirty and it's not hard.

[dhcg86]

Cabriolet is honestly one of the nicest people I know

and yes, my name is dane.

Cab wants to get a bike, what do you guys think?

[Cabriolet]

ya something like this. http://sfbay.craigslist.org/sby/mcd/3251036583.html http://sfbay.craigslist.org/sby/mcd/3248739055.html

[Chunter]

Can somebody explain why rear camber plates on an E30 wouldn't work? The only option for adjusting rear camber are the weld on kits right?

[Cabriolet]

Can somebody explain why rear camber plates on an E30 wouldn't work? The only option for adjusting rear camber are the weld on kits right?

bavauto sell shitty bolt in ones, that im running. but yes you want the weld in ones.