NOR-CAL General Chat.

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • CabbE30
    R3VLimited
    • Aug 2009
    • 2358

    #9121
    Originally posted by mbonanni
    did you say there is milkshake under the cap?
    There is..

    Comment

    • mbonanni
      R3V OG
      • Sep 2011
      • 6236

      #9122
      "damage" is done.

      You most likely blew your HG or cracked your head. When this happened to me I replace
      - Head Gasket
      - Head bolts
      - All timing components
      - Waterpump
      - Hoses
      - Coolant
      - Oil and filter
      - Thermostat
      - Valve cover gasket

      I am sure there is more, but those are the main ones. In addition to that I also got my head pressure tested and resurfaced.

      When replacing oil here is what I did.
      1. Drain the milkshake
      2. Put on new filter and in new oil
      3. Start car let run to operating temp.
      3. Drain oil
      4. Repeat 2 and 3
      5. Repeat 2 and 3 again
      6. New filter and oil

      This is was blunt told me to do. This process makes sure all, or most of, the "milkshake" is out of the pan. If you run with coolant in your oil there is a possibility of frying your bearings.

      Goodluck.

      Comment

      • bastianshaw
        R3VLimited
        • Jan 2007
        • 2210

        #9123
        use cheap oil for the first 2 changes then put in some vr1
        HG really not that bad + after fix motor will go forever :-)

        Comment

        • mbonanni
          R3V OG
          • Sep 2011
          • 6236

          #9124
          Yeah, don't use expensive oil lol. The process is just to clear out the milkshake.

          Comment

          • golde30
            R3V OG
            • Nov 2003
            • 11464

            #9125
            Cool to hear Chris's touring will be in the bay... I hope to have my s50 powered touring back on the road this year, murdered out.
            IG: @Baye30

            FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!!

            Comment

            • adamtnyc
              Member
              • Jan 2011
              • 58

              #9126
              Need a good mechanic for my E30 in Bay Area.

              I just moved up here from SoCal and I need to do some stuff to my car. What are the good shops in the Bay Area for our E30s. I would also consider a privateer enthusiast who wants to make some extra money. I'm in the Outer Richmond but willing to travel a bit to find the right person. I need a NorCal Castro's!

              Comment

              • SouthBayE30
                Noobie
                • Oct 2012
                • 20

                #9127
                I'm also looking for a good mechanic in the South Bay - any suggestions?

                Comment

                • Vivek
                  attention whore/retard/bitch
                  • Oct 2011
                  • 6167

                  #9128
                  Jonny may be able to take care of you. A few people on here do side work.
                  The first car I ever rode in was an e30

                  Originally posted by Cabriolet
                  Wish you the best and hope you don't remember anything after 10pm.



                  1992 Mauritiusblau Vert
                  2011 Alpinweiss 335is coupe

                  2002 540i/6 Black/Black
                  2003 GSX-R 750 (RIP)

                  Comment

                  • Pantless Spency
                    It's McRib time!!!
                    • Feb 2011
                    • 7284

                    #9129
                    Originally posted by adamtnyc
                    Need a good mechanic for my E30 in Bay Area.

                    I just moved up here from SoCal and I need to do some stuff to my car. What are the good shops in the Bay Area for our E30s. I would also consider a privateer enthusiast who wants to make some extra money. I'm in the Outer Richmond but willing to travel a bit to find the right person. I need a NorCal Castro's!
                    all be it pretty far i highly recommend RGMW, ryan gangemi motorworks in auburn.
                    he does stellar work,FB page linked bellow:
                    Ryan Gangemi Motorworks, Auburn, California. 354 likes · 110 were here. We are here for all your German Auto Repair Needs! BMW, Mini Coopers, Audi, Mercedes and Porsche too! Smog on 2000+ vehicles...


                    i also recommend CAtuned, they are some great dudes as well, but again there also in the sacramento area.


                    hope this helps some! welcome to the bay.

                    Comment

                    • golde30
                      R3V OG
                      • Nov 2003
                      • 11464

                      #9130
                      Hollar at me, I have a fully equipt shop in my garage at home, been working out of my home for almost a year.
                      IG: @Baye30

                      FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!!

                      Comment

                      • ASDTANk
                        Noobie
                        • Sep 2012
                        • 21

                        #9131
                        wagon is teh sex

                        Comment

                        • CabbE30
                          R3VLimited
                          • Aug 2009
                          • 2358

                          #9132
                          Originally posted by mbonanni
                          "damage" is done.

                          You most likely blew your HG or cracked your head. When this happened to me I replace
                          - Head Gasket
                          - Head bolts
                          - All timing components
                          - Waterpump
                          - Hoses
                          - Coolant
                          - Oil and filter
                          - Thermostat
                          - Valve cover gasket

                          I am sure there is more, but those are the main ones. In addition to that I also got my head pressure tested and resurfaced.

                          When replacing oil here is what I did.
                          1. Drain the milkshake
                          2. Put on new filter and in new oil
                          3. Start car let run to operating temp.
                          3. Drain oil
                          4. Repeat 2 and 3
                          5. Repeat 2 and 3 again
                          6. New filter and oil

                          This is was blunt told me to do. This process makes sure all, or most of, the "milkshake" is out of the pan. If you run with coolant in your oil there is a possibility of frying your bearings.

                          Goodluck.
                          Thanks for the info, I dont think it is a cracked head because the motor has never been anywhere near over-heated, but I will get it checked. I just did the timing components and the cooling system like 3000 miles ago so I'm hoping I can clean out those components well enough.

                          Comment

                          • Albuquerque30
                            E30 Fanatic
                            • Oct 2010
                            • 1349

                            #9133
                            Originally posted by golde30
                            Cool to hear Chris's touring will be in the bay... I hope to have my s50 powered touring back on the road this year, murdered out.
                            I'll have to lookout for a meet here in the next week or two so everyone can take a look at it.

                            e30 or e34 touring?

                            Originally posted by ASDTANk
                            wagon is teh sex
                            Thanks. Can't wait to show it off. :)

                            WTB NorCal: Z4 shifter + misc. parts

                            Comment

                            • ohthejosh
                              R3V Elite
                              • Mar 2010
                              • 4963

                              #9134
                              Crap gotta pay my "failure to obey a road sign" ticket ~300 smackeroos down the shithole.
                              SO MUCH MORE TO DO!!
                              IG: ohthejosh

                              LEGIT CHECK ME BRUH
                              BUYER FEEDBACK THREAD

                              Comment

                              • Pantless Spency
                                It's McRib time!!!
                                • Feb 2011
                                • 7284

                                #9135
                                Originally posted by ohthejosh
                                Crap gotta pay my "failure to obey a road sign" ticket ~300 smackeroos down the shithole.

                                Comment

                                Working...