NOR-CAL General Chat.

[Vivek]

SJ ladies, i have a press now and will have a trailing arm bushing tool next week weekend. feel free to bring your extra subframes by.

Just in time for the burn on my hand from taking mine out to finish healing! I'll probably need your TAB tool though since I'm not interested in building the trailing arms outside the car (unless you'd suggest that--I have a spare pair).

[YosemiteSam]

95% chance that's a fuse. #10 off the top of my head but I'm not sure.

That's what I've been reading, but after inspection I found that my fuses were fine. I then wriggled underneath the car and found that one of the leads to the speed sensor in the diff was no longer connected at the plug. Tomorrow I should have time to jack up the car and get it reconnected.

[joonsup]

Hey guys, I have the xpipe portion of the topspeed catback exhaust that I'm going to try to sell. I had it on for a couple years and in the process the muffler shop cut and welded on a couple different mufflers and a new cat but it still has a ypipe on there. One of the bolts on the flanges were welded by accident I think so it's stuck but still tightens from the nut end. I was gonna scrap it for metal but I figure maybe someone might need it. 20 bucks picked up. pm me with your number if you are interested and i can send you picture

[CabbE30]

That's what I've been reading, but after inspection I found that my fuses were fine. I then wriggled underneath the car and found that one of the leads to the speed sensor in the diff was no longer connected at the plug. Tomorrow I should have time to jack up the car and get it reconnected.

I would replace/or sand down the contacts on the fuses just to be sure.

[kronus]

Are any of you heading to portland, past portland, and/or back from portland in the near future?

[smooth]

Are any of you heading to portland, past portland, and/or back from portland in the near future?

I am

Hey guys, I have the xpipe portion of the topspeed catback exhaust that I'm going to try to sell. I had it on for a couple years and in the process the muffler shop cut and welded on a couple different mufflers and a new cat but it still has a ypipe on there. One of the bolts on the flanges were welded by accident I think so it's stuck but still tightens from the nut end. I was gonna scrap it for metal but I figure maybe someone might need it. 20 bucks picked up. pm me with your number if you are interested and i can send you picture

Would you consider shipping it? I pm'ed you my number.

[Thizzelle]

hey sully how was meet on Sunday I forgot about it, got drunk and stayed up till 4. I tried to go but was still drunk in the morning at 8 lol

[Pantless Spency]

howdy fellas :D

[Albuquerque30]

I'm already leaning towards the normal silver, but let's hear some color ideas for some Racing Dynamics RGP's on a white e34 touring. Go!

For reference:

[mbonanni]

Silver. Not black, not white. Maybe Orange, maroon, or bronze?

[Albuquerque30]

I was actually thinking orange. Haha.

[Pantless Spency]

fucking bright ass orange. plastic looking.

sounds awesome.

[kronus]

Smooth, iiinteresting. I'll shoot you a pm tomorrow.

[Albuquerque30]

What about white lips, orange spokes? Haha. Pain to clean, right? Just playin'.

[Pantless Spency]

What about white lips, orange spokes? Haha. Pain to clean, right? Just playin'.

i was hoping you were kidding :)