ecu, icv, door panels, seats, headlights if ellip, tail lights, turn signal stalk to go with obc, speakers, head unit, hvac panel, lock actuators, switches, bumper trim, side trim, gas cap lol
Announcement
Collapse
No announcement yet.
NOR-CAL General Chat.
Collapse
This is a sticky topic.
X
X
-
Originally posted by Thizzelle View Postecu, icv, door panels, seats, headlights if ellip, tail lights, turn signal stalk to go with obc, speakers, head unit, hvac panel, lock actuators, switches, bumper trim, side trim, gas cap lol
Comment
-
Originally posted by WarHammer 2/1 View PostCar has to be running when I turn it in to pick n pull.
Comment
-
Originally posted by ohthejosh View PostDoes have to be running and or just rolling?
- The vehicle must have been driven to the dismantler site under its own power.
- The vehicle dismantler will inspect the vehicle to ensure it meets the following requirements and must reject the vehicle if the vehicle fails any one of these requirements:
- All doors must be present and in place.
- The hood shall be present and in place.
- The dashboard shall be present and in place.
- Windshield shall be present and in place.
- The driver's seat must be present and in place.
- Interior pedals shall be operational.
- The vehicle must have one bumper and all side and/or quarter panels shall be present and in place. Vehicle drivability must not be affected by any body, steering, or suspension damage. Exhaust system shall be present and in place.
- One headlight, one taillight and one brake light shall be present and in place.
- One side window glass shall be present and in place.
- The vehicle dismantler will complete the following functional inspection, and shall reject the vehicle if the vehicle fails to complete the following test:
Insert key, vehicle engine must start using keyed ignition system. In addition to the keyed ignition switch, ignition or fuel kill switch may be activated if required to start engine. The vehicle must start readily through ordinary means without the use of starting fluids or external booster batteries. The vehicle shall be driven forward for a minimum of 25 feet under its own power. The vehicle shall be driven in reverse for a minimum of 25 feet under its own power.
Comment
-
dropped in full GC coilovers, tie rods and control arms for Kitt today.
drives great
IMG_6411 by Eric Berger, on Flickr
Comment
-
I have a staggered set of corvette salad shooters with tires that I'll let go of for cheap, because Christmas, if you want something less boring :Ppast:
1989 325is (learner shitbox)
1986 325e (turbo dorito)
1991 318ic (5-lug ITB)
1985 323i baur
current:
1995 M3 (suspension, 17x9/255-40, borla)
Comment
Comment