Hey guys,
Lately its been hard for me to get my car into gear, so I figured it was either my master or slave. I replaced my slave, no luck. Then went on to the master and saw the pedal bracket was cracked. Replaced all the bracket and the master.
Now here is the real issue, I went through the whole bleeding process where there is a pump at the bottom and the air bubbles are all pushed to the top. With all that out of the way, the pedal is soft, and it wont go into gear. Kept pumping the pedal, it would get stiff, not enough to get into gear. If I hold the pedal for about 5-10 seconds it loses all its pressure.
What can it be?
ScentOfGas, I don't have a ride right now and I'll try to pick it up when I get the car in driving condition
For Gods Sake Michigan
Collapse
X
-
-
Charbel is your best bet. He usually has ads on craigslist or you can find him fairly easily on FacebookLeave a comment:
-
I would be down for some sort of MI meet up this summer....I don't own an e30 tho. LS1 e28 or m42 2002 will work out thoLeave a comment:
-
Haha ok well depending on what time during the summer, I may be in.Leave a comment:
-
summer time probably. I don't know much more than the fact that it existsLeave a comment:
-
Sad but true, I think I'm gonna try to get a group together for east coast bimmer fest thoughLeave a comment:
-
Leave a comment: