Looking for a good 3.73 lsd.
Announcement
Collapse
No announcement yet.
Virginia WTB thread
Collapse
X
-
Anyone want to trade a 3.25 lsd for my 4.10 lsd +cashLast edited by PimpinWalrus; 02-22-2015, 10:14 AM.
Comment
-
Originally posted by tbshadowIf anyone's got a set of strut tubes they're willing to get rid of cheap.
Previous owner beat in the tubes to put wider tires on. Now my struts are shot and I can't get the inserts out. I don't mind spending some money on good struts but I'm not looking to rebuild the entire suspension.sigpic
1987 - 325i Convertible Delphin Auto [SOLD], 325i Convertible Delphin Manual [SOLD]
1989 - 325i Convertible Bronzit m30b35 swapped [SCRAPPED], 325i Sedan Alpine Auto[DD]
1991 - 325i Coupe Laguna Manual [Project], 535i Sedan Alpine [SCRAPPED]
Comment
-
FS: $600 m20b25 w/ ~190k miles and getrag 260/5
I did an m30b35 swap on my convertible, so I have the old engine and trans for sale. They both came out of my 1989 325i vert and rean/drove with no problems. I just wanted to do something funky and get more power, so I started swapping. I want $300 for each.
Engine: m20b25 with roughly 190,xxx miles. I just replaced the oil pan gasket and gave it an oil change (~20 miles on it). The alternator was replaced within the last 2 or 3 years. The power steering pump was replaced in 2009. The starter was replaced maybe a year or two ago. it will come with all of the accessories but the AC compressor and injector plug wires. I forgot to take a video of it running before taking it apart, but it ran great.
Transmission: g260/5 with the same amount of miles. It will come with a clutch/pressure plate that has decent life. I can also throw in a pivot pin, pivot arm, throwout bearing, and retainer clip if you want (but they should all be replaced while the trans is out of the car). I replaced the reverse light switch in 2008. I replaced the shift selector shaft seal, the outbut flange seal, and it got a fluid flush and refill using Redline MTL in 2012. It shifted great with no syncro problems. You will need an output flange since I used it for my m30 swap. Also, you will notice that the driver side rear mount has a broken tab. I've driven it for years like that with no problems.
sigpic
1987 - 325i Convertible Delphin Auto [SOLD], 325i Convertible Delphin Manual [SOLD]
1989 - 325i Convertible Bronzit m30b35 swapped [SCRAPPED], 325i Sedan Alpine Auto[DD]
1991 - 325i Coupe Laguna Manual [Project], 535i Sedan Alpine [SCRAPPED]
Comment
Comment