WTBuy/Borrow 60mm i.d. Springs

[Eric]

Length or rate doesn't matter, I just need the car on the ground this week to roll it onto a trailer and take it to my new house.

[iamsam]

Length or rate doesn't matter, I just need the car on the ground this week to roll it onto a trailer and take it to my new house.

for what car?

[clarkkey594]

Length or rate doesn't matter, I just need the car on the ground this week to roll it onto a trailer and take it to my new house.

Chris probably has some lying around.If I had extras for the M I'd let you borrow them.

[iamsam]

I have plenty of springs, but I don't know what car you need them for...

[Eric]

I have plenty of springs, but I don't know what car you need them for...

Sam, 60mm springs are not dependent on the chassis.

[iamsam]

Sam, 60mm springs are not dependent on the chassis.

help me out here... I don't know if any of my springs are 60mm. I have E30 springs and I will soon have cut E28 springs available...

[Roland H]

help me out here...

OK. :D

http://lmgtfy.com/?q=60mm+springs

;)

[Cloudbase]

I've got two sets of Z3M springs, but I measuring the ID they are far off 60mm in both directions.

[Eric]

HealAndToe85 on bf.c hooked me up with a set of 570in/lb swifts yesterday!


I bought 2.5" hyperco's and they were way to big. The 60mm fit perfect

Here you can see how much gap was between the spring and the centering guides of the top hat. Hopefully there isn't too much fuss about exchanging the 2.5" hyperco's for some 60mm hyperco's.


2.5" I.D. spring pushed all the way over to one side


60mm I.D. spring pushed all the way over to one side




As you can see, for my application, the 60mm spring fits much much better!

[HeelAndToe85]

HealAndToe85 on bf.c hooked me up with a set of 570in/lb swifts yesterday!


I bought 2.5" hyperco's and they were way to big. The 60mm fit perfect

........

As you can see, for my application, the 60mm spring fits much much better!

I've been lurking on here for a while without posting. Don't tell anybody, but I don't have an E30!

Glad to see the springs are working out- do you know if they are swifts?

[iamsam]

I've been lurking on here for a while without posting. Don't tell anybody, but I don't have an E30!

Glad to see the springs are working out- do you know if they are swifts?

Half the people in the Mountain section don't own an E30, and never intend to.

[Bimmerman325i]

Half the people in the Mountain section don't own an E30, and never intend to.

Ehh....I think all of us (or 99%) have owned one in the past.

[Eric]

I've been lurking on here for a while without posting. Don't tell anybody, but I don't have an E30!

Glad to see the springs are working out- do you know if they are swifts?

Yes, I checked a few other pictures on the internets and they all say "racing" just like these. Thanks again, and welcome to r3v, the mountain section is pretty active!

[fsmtnbiker]

Those springs get around. :)

Hi Steve!

[HeelAndToe85]

Those springs get around. :)

Hi Steve!

Haha, yeah I thought you'd recognize them.