If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
-4x100
-15x7
-et23 offset
-CB66.56/57 by my measurement
-Made in France in 1995
-I believe the specific model may be called the "Concord"
Never seen pictures or mention of these wheels on the internet in any of my searches over the years. Would be curious if anyone can offer additional information on them. Bought them as BMW E30 wheels but found the centerbore wasn't exact and would ideally need a centering ring and I moved past the E30 before using them. Wheels are a grey-silver on the front faces and black on the rear inside. Paint is a 6/10 to me, they could certainly be run as-is as a daily wheel, but there are paint chips here and there and they could use some touch-up to be a 7 or 8, and could use an afternoon of elbow grease to get to a 9 or maybe even a 10. Should be able to fit multiple 4x100 vehicles with appropriate hub rings - VW, Honda, BMW etc. Four FVH concept center caps included.
$375 obo
Pick up only in Stamford, CT moments off Exit 34 Merritt or minutes from Exit 6 I-95. Will ignore any PMs asking about shipping.
Wheels still available, reduced to $300. Vintage, sturdy, unique, made in France - someone pick these up!
I promise you'll be the only E30 with these wheels at any show or meet-up you attend, or I'll eat my own sock.
Standard Autozone 750LB engine stand - excellent condition. Stand, adjustable engine mount, rotating handle and locking pin.
$60 picked up for a forum member - SOLD
Two (2) BBS RZ378 15x7 wheels - 225/50/15 Toyo tires with low/very low tread, but not corded by any means. Had been powdercoated black with white lips, then plastidipped black which kind of baked on and became semi-permanent?
looking for Front Driver door (Sedan) preferably white but will look the other way at the right price point. Please text or call me directly 508.654.1313 - Parker
Looking for a set of black convertible door cards front and rear with handles and pockets etc. Pref for an early model with the manual top handle cut out but either will work. In or near CT
-4x100
-15x7
-et23 offset
-CB66.56/57 by my measurement
-Made in France in 1995
-I believe the specific model may be called the "Concord"
Never seen pictures or mention of these wheels on the internet in any of my searches over the years. Would be curious if anyone can offer additional information on them. Bought them as BMW E30 wheels but found the centerbore wasn't exact and would ideally need a centering ring and I moved past the E30 before using them. Wheels are a grey-silver on the front faces and black on the rear inside. Paint is a 6/10 to me, they could certainly be run as-is as a daily wheel, but there are chips here and there and they could use some touch-up to be a 7 or 8, and could use an afternoon of elbow grease to get to a 9 or maybe even a 10. Should be able to fit multiple 4x100 vehicles with appropriate hub rings - VW, Honda, BMW etc. Four FVH concept center caps included.
$375 obo
Pick up only in Stamford, CT moments off Exit 34 Merritt or minutes from Exit 6 I-95. Will ignore any PMs asking about shipping.
Been up on CL for awhile too with no bites, longest of all the E30 parts I've sold lately by far. If anyone has feedback, by all means clue me in - are they ugly in most of your opinions? Are 15x7 wheels out of favor these days? The fact that they need a centering ring ideally?
I can almost swear on my life you'll never find another E30 running these wheels, they're not an ostentatiously ugly design, good size and offset, made in France and not China, and they're less than $200...I'm just scratching my head currently. Thanks for any input.
I am parting out an 1989 325IX I am taking the 5 speed swap but everything else is avail. The car is extremely rusty so the body panels are not great. Seats are trash but grey leather door cards are in good shape. I also have a ton of other parts avail, looking to unload as much as possible before I move! Message me with needs
Comment