finally back on the road. after a few day project on full front and partial rear suspension
thanks to all the guys that bought parts so I could buy parts
thanks matt-b for the springs ( all 4)
new billy sports ( all 4), upper strut mounts, control arms, offsets, links, bushings, tie rods, rotors and pads ( all 4) and the big diff bushing
dropped the front to 24 1/4 ( from 26) the back to 22 1/2 form 24
sitting on stock weaves nd 205/60x14's ( near bald)
still cant drive it much til wednesday, earliest I can get it aligned, but sure was fun to drive today
hope to be at Matts on the 8th for the big party
picture is not on level ground, had not put on my center caps yet,
have a magnaflow on order
want a skid plate
so to date ( car had sat for 2 years when I bought it, in december, wiht blown head gasket)
the suspension
rebuilt head, h20 pump, hoses, summer thermostat, fan delete and volvo electric puller fan
delete p/s and a/c
delete all the throttle body heater crap
chipped and 4 pintle big injectors
new wires /plugs
short shift
dropepd and cleaned fuel tank
all filters ( and prefilter)
all fuel hoses
rebuilt starter ( had to) and alternator (preventative)
ellipsoids
replace fog light lenses
added "euro style" plug to rear brake lights
keyless entry
future: rebuild caliprs and ss hoses
wheel bearings all 4 ( preventative)
install straight front valance ( have , just need to paint)
install "is" trunk lid ( no 3rd light, has "is" spoiler, just need to paint)
top "boot" shocks ( to hold it open when needed)
e36 rack
skid plate and corss brace
fatter rear bar
install smiked side markers ( have em, will do tomorrow)
well better get back to work on it
just had to come in and "brag" now that its on the road again
thanks to all the guys that bought parts so I could buy parts
thanks matt-b for the springs ( all 4)
new billy sports ( all 4), upper strut mounts, control arms, offsets, links, bushings, tie rods, rotors and pads ( all 4) and the big diff bushing
dropped the front to 24 1/4 ( from 26) the back to 22 1/2 form 24
sitting on stock weaves nd 205/60x14's ( near bald)
still cant drive it much til wednesday, earliest I can get it aligned, but sure was fun to drive today
hope to be at Matts on the 8th for the big party
picture is not on level ground, had not put on my center caps yet,
have a magnaflow on order
want a skid plate
so to date ( car had sat for 2 years when I bought it, in december, wiht blown head gasket)
the suspension
rebuilt head, h20 pump, hoses, summer thermostat, fan delete and volvo electric puller fan
delete p/s and a/c
delete all the throttle body heater crap
chipped and 4 pintle big injectors
new wires /plugs
short shift
dropepd and cleaned fuel tank
all filters ( and prefilter)
all fuel hoses
rebuilt starter ( had to) and alternator (preventative)
ellipsoids
replace fog light lenses
added "euro style" plug to rear brake lights
keyless entry
future: rebuild caliprs and ss hoses
wheel bearings all 4 ( preventative)
install straight front valance ( have , just need to paint)
install "is" trunk lid ( no 3rd light, has "is" spoiler, just need to paint)
top "boot" shocks ( to hold it open when needed)
e36 rack
skid plate and corss brace
fatter rear bar
install smiked side markers ( have em, will do tomorrow)
well better get back to work on it
just had to come in and "brag" now that its on the road again
Comment