WTB: Looking to find some stuff in the PNW

[John T]

Looking for front plastic bumper conversion pref Zinno
Bronzit plastic bumper conversions
Front Valence for plastic bumper pref Bronzit
Vert black interior parts
Vert lotus interior parts (long shot.... I know)
Black driver vert seat


Thanks
John

[John T]

Nobody?

[John T]

Daym still no hits???

[StereoInstaller1]

John, lets talk about what you want in an M20. Mine is high mileage, but running nicely and 3 guibo bolts away from driving.

It need a head freshning, likely injectors, DEFINITELY needs a timing belt/water pump/seals/valve adjust...but was gonna freshen the head first, as all that would be best done together, and I have a good spare head, new timing belt/gaskets/water pump, etc.

But then, out of the blue, an S50 fell into my garage.

If you came up, you could have the motor, the spare parts, the ECU/Harness/accessories, the fresh head, ALL of it for $400.

Nothing behind the block at all, no pressure plate, flywheel, etc.

Hell, I will throw in a couple other parts too if ya wanna, couple intake manifolds, etc.

If you want, you could come up and hang out and help pull it so you could hear it run, etc. Takes 3 or 4 hours to pull a motor, no big deal.

Or, I could freshen that motor and sell it to you for significantly more all clean and pretty and fresh, or something in the middle. It is right now 15,000 miles past due on the timing belt, so I am not driving the car much until the swap is done.

Not like these motors are rare or anything, so get in touch if you might be interested.

Luke

[John T]

Edit: found an m20 today

Thanks for help StereoInstaller1

[e30josh]

i got a wrecked 1990 brilliantrot 325is.. the rear is perfect if u need the plastic bumper and all the stuff to convert it. annndd i believe a bronzit front valence and plastic bumper. pm me

[bmwm42]

There is a very in a local yard with black interior no seats that want like ten bucks a panel for its in turner

[John T]

There is a very in a local yard with black interior no seats that want like ten bucks a panel for its in turner

Thank you sir... I will hit that up. Do you know if they are open Sunday ?

[John T]

Edit