Need to borrow a part.

[Plan.B]

I need the cap wrench for threading and unthreading Bilstein inserts. Does anyone have one I can borrow? Here is a picture of the tool.



---
I am here: http://tapatalk.com/map.php?sdg3nq

[kid325e]

Channel locks and a shop rag have always worked for me.

[PNWDan]

A punch and hammer. Tap gently with the punch in the slot in the direction you need to turn it.

[bmwm42]

Plumbers wrench

[AirplaneBuilder]

plumbers wrench

+1

[akorcovelos]

Plumbers wrench

[LivingLegend06]

I made my tool with a piece of angle iron and a cutoff wheel.

[spdracrm3]

i have the tool,might take awhile to find it though.will let u know.

[cramer]

I have the tool but am no where near you.

I found Bilstein has at least a couple sizes. On one E30 I was pulling the struts out on the tool didn't fit so second best was a plumbers wrench, worked great.

[Brilliantrot 318is]

I used this yesterday, installed new Billy strut inserts

works every time :)

[Twelvizm]

Use ur teeth!

[dantheman]

Use ur teeth!

Saw you posted that on his vortex thread and loled.