FS: Euro M30B35 (M1.0) out of an '81 635

[e30austin]

Bought this in a package deal for my E30 track car and have no use for it, since I'm going to be using an E34 M30B35.

Motor came from an '81 635 and had roughly ~100k miles. Ran when pulled. I would refresh it before dropping it in a car, since it is 30 years old. Comes with M1.0 harness and DME.

$300 firm or trade for E34 M30B35 (doesn't have to have harness or DME.) Local pick up only. I will not ship this.

-Austin 503.810.0558

[Killacortes]

Do you know what tranny/driveshaft combo works?

[e30austin]

If it's an M30 trans, it'll work (G260/6, G265, etc.) Needs to have holes for the reference sensors in the bell housing.

As far as an M30 into E30 driveshaft goes, you use the front half of whatever trans you have and the back half off an E30 M3 or '87 ETA. The M30 swap guide says you can use an '87 ETA manual or '88 Super ETA manual with the big guibo (3.12".)

[LuckyHenriksen]

Sweet, GLWS Austin

[jeffw]

is this coming out of the red car austin?

[e30austin]

No sir, the red car is an M50TU. This would be pretty sweet in your ETA :)

[mdlimy]

bump bc racecar

[e30austin]

:)

[e30austin]

Bump for pics!

[ethirtydavid]

cool engine, talk to Max from maximilian motorsports in WA. He loves e24's and would probably buy an motor.
(360) 748-8578

[e30austin]

cool engine, talk to Max from maximilian motorsports in WA. He loves e24's and would probably buy an motor.
(360) 748-8578

Thanks for the tip, David! I'll give him a call tomorrow.

[ethirtydavid]

:up:ugatitdood

[e30austin]

Still available.

[e30austin]

Easter bump.

[2mAn]

thats a pretty good deal. how much heavier are these things than the m20 motors?