Rear Strut Bar

Collapse
X
Collapse
 
  • Page of 5
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 template Next
  • Dussen
    Mod Crazy
    • May 2009
    • 660
    #1

    Rear Strut Bar

    So as most of you know. AAA325iS and myself have been working on a rear strut bar for our cars.

    We have test fit our prototype in both of our cars and will soon test fit in a sedan.

    Once we are certain that the fitment is correct we would like to start production on more of these for other users if there is enough interest.

    Check out the photos here and let me know what you think. The pictures shown are the test fitment in my 90 M3 with Koni Shocks. I tested with and without the extra upper shock support plate.

    Take the time to check out all 8 pictures in the album.

    Member Not Found | Fotki.com, photo and video sharing made easy.
    http://public.fotki.com/dussen/100ncd80/dsc-0167.html


    Thanks for looking and hope to hear back from you all.

    1. spiDmang - Pending Pickup
    2. rpm32 (RAW) - Delivered
    3. semaj4712 (RAW) - Delivered
    4. hp1
    5. MillerMotoring (RAW) - Shipped
    6. RedManE30 (Gloss Black) - See you next weekend
    7. wu99wu (RAW) - Pending Shipping
    8.
    9.
    10.

    We have 3 left.
    Last edited by Dussen; 01-29-2013, 06:13 PM.
    Tags: None
    • Dussen
      Mod Crazy
      • May 2009
      • 660
      #2
      Price would be around $100 per bar and we're looking into powerder coating them as well.

      As of right now we're thinking paint either flat or gloss black.

        Comment

        • spiDmang
          No R3VLimiter
          • Nov 2010
          • 3941
          #3
          Are you available this weekend Dustin? I definitely want one.
          -Brad, AlphaTeam Motorwerks, LLC
          91' 318iS - S54/6MT Swapped
          08' E90 M3 6MT - Daily
          04' Chevy Duramax CCLB - Work Truck/Hauler


          Originally posted by IronJoe
          Alpha Team: running through e30s, gringo icebergs, and 19 yr olds.

          Originally posted by 2mAn
          Brads a standup guy even though he likes buttsex

            Comment

            • Dussen
              Mod Crazy
              • May 2009
              • 660
              #4
              Yes Brad, I should be available on Sunday to help install this.

              Did you want flat black or gloss?

              1. spiDmang
              2.
              3.
              etc....

              We have 9 more available.

                Comment

                • AbeSonic
                  Price check on Vagiclean, aisle five. I repeat: price check on Vagiclean, aisle five. That's Vagiclean. We've got a customer down here with a full-on fallopian fungus. I'm baking a loaf of bread and I think it's sourdough.
                  • Sep 2010
                  • 3635
                  #5
                  These look cool. What type of metal did you use?

                  out dated sig is out dated

                    Comment

                    • spiDmang
                      No R3VLimiter
                      • Nov 2010
                      • 3941
                      #6
                      Gloss please
                      -Brad, AlphaTeam Motorwerks, LLC
                      91' 318iS - S54/6MT Swapped
                      08' E90 M3 6MT - Daily
                      04' Chevy Duramax CCLB - Work Truck/Hauler


                      Originally posted by IronJoe
                      Alpha Team: running through e30s, gringo icebergs, and 19 yr olds.

                      Originally posted by 2mAn
                      Brads a standup guy even though he likes buttsex

                        Comment

                        • Dussen
                          Mod Crazy
                          • May 2009
                          • 660
                          #7
                          Originally posted by spiDmang
                          Gloss please
                          You got it Brad.

                          Originally posted by AbeSonic
                          These look cool. What type of metal did you use?
                          Metal information:
                          End Plates: 11 Gauge
                          Center Tube: 1" x 0.120 wall thickness

                            Comment

                            • Wschnitz
                              R3V OG
                              • Dec 2011
                              • 8089
                              #8
                              Aluminum or Steel? I might get one of these for the next E30 if you are still selling them.
                              1989 BMW 325is | 2019 Ford Ranger FX4
                              willschnitz

                                Comment

                                • BlapBlap
                                  E30 Addict
                                  • Mar 2011
                                  • 564
                                  #9
                                  Id be interested if the price were lower.....white325is sells them for $100 shipped and Ireland Engineering sells them for $90 which both of these bars seem to mimick

                                    Comment

                                    • White325is
                                      R3V Elite
                                      • Oct 2006
                                      • 5947
                                      #10
                                      ^^^^ I sell them for 100 shipped with powdercoating. IE sells them for 90. Raw. And plus shipping. Make sure you add all of that in there.

                                      And op. good luck with sales.

                                        Comment

                                        • bigdrick323
                                          Mod Crazy
                                          • Feb 2012
                                          • 616
                                          #11
                                          Can these be fit to convertible?

                                          I am away from my computer, being lazy!
                                          sigpicMy Project!

                                          Official North Texas Bimmers Club E30 Representative

                                          www.BimmerAlliance.net

                                          "If you have questions about events or need help in the DFW area don't be afraid to contact me."

                                            Comment

                                            • AbeSonic
                                              Price check on Vagiclean, aisle five. I repeat: price check on Vagiclean, aisle five. That's Vagiclean. We've got a customer down here with a full-on fallopian fungus. I'm baking a loaf of bread and I think it's sourdough.
                                              • Sep 2010
                                              • 3635
                                              #12
                                              My immediate thought is no ^

                                              out dated sig is out dated

                                                Comment

                                                • Dussen
                                                  Mod Crazy
                                                  • May 2009
                                                  • 660
                                                  #13
                                                  Originally posted by Wschnitz
                                                  Aluminum or Steel? I might get one of these for the next E30 if you are still selling them.
                                                  Steel.

                                                  Originally posted by bigdrick323
                                                  Can these be fit to convertible?

                                                  I am away from my computer, being lazy!
                                                  If we can get a vert to verify fitment we could move forward with a vert line. From my knowledge verts are not the same. So we will try to get a vert and go from there.

                                                  Originally posted by AbeSonic
                                                  My immediate thought is no ^
                                                  Your thoughts betray you. We will have a vert prototype Sunday.

                                                  And for everything else:

                                                  Aaron is TIG welding these and as you'll be able to tell from our new pictures ours are a little different from the other guys. Check out the newest pictures.

                                                  Member Not Found | Fotki.com, photo and video sharing made easy.
                                                  http://public.fotki.com/dussen/100ncd80/dsc-0185.html

                                                    Comment

                                                    • Dussen
                                                      Mod Crazy
                                                      • May 2009
                                                      • 660
                                                      #14
                                                      Teaser for you Brad.

                                                        Comment

                                                        • Dussen
                                                          Mod Crazy
                                                          • May 2009
                                                          • 660
                                                          #15
                                                          1. spiDmang
                                                          2. rpm32
                                                          3.
                                                          4.
                                                          etc....

                                                          We have 8 more available.

                                                            Comment

                                                            Previous 1 2 3 4 5 template Next
                                                            Working...