Looking for M60 M62 swapped car

[ejnight]

So this swap is more common now and I want to make a skid plate for it. If you have a car I will make the plate for it. IF you know of one please give me the lead.

[e30austin]

Gregslow318i was the only guy I know of locally, but he's not around anymore.

[Knoepfler]

Gregslow318i was the only guy I know of locally, but he's not around anymore.

Well, he's not dead

[ejnight]

Well, he's not dead

PM/Email sent we will see. Thanks, keep them coming.

[Mlarsen]

Gregslow318i was the only guy I know of locally, but he's not around anymore.

I thought he sold it.

[PNWDan]

Gregslow318i was the only guy I know of locally, but he's not around anymore.

When I first met Mr Greg he talked trash about a guy on the forum selling skid plates for way too much and how skid plates were useless. I've always thought he was referring to you ejnight

[Killacortes]

Car is not sold its actually supercharged

[EN318isPDX]

Car is not sold its actually supercharged

I've seeeeeeeeeeeeeeeeeen it. Can see the bracket a mile away

[kylelauffer]

M30 skid plates??

[JGood]

I can get measurements for you if you want. But the thing with m60 swaps is that some people use subframe spacers and some don't, and that changes the height of the engine and the subframe, in relation to the frame rails and core support, etc...

And m60's have steel lower pans that take about 10 minutes to swap out, so it's not quite as critical. I bashed mine pretty hard and it just dented it a bit.

[ejnight]

I can get measurements for you if you want. But the thing with m60 swaps is that some people use subframe spacers and some don't, and that changes the height of the engine and the subframe, in relation to the frame rails and core support, etc...

And m60's have steel lower pans that take about 10 minutes to swap out, so it's not quite as critical. I bashed mine pretty hard and it just dented it a bit.

The guy looking is east cost and using spacers. Good info Thank you.

[ejnight]

M30 skid plates??

Yes in stock and ready to ship.