WTB: thin wall 30mm socket

[e30austin]

If any of you local guys have a thin wall 30mm socket I can buy/borrow for an extended period of time, lemme know. I'm not going to grind down my $50 Snap On socket to fit inside the output flange of a G260.

Please let me know ASAP!

[Ryann]

I bought a POS Performance Tool socket and spun it on the bench grinder until it fit.

[uturn]

Northern tools had a thin wall 30mm

[e30austin]

I bought a POS Performance Tool socket and spun it on the bench grinder until it fit.

Since Baxter's is 5 blocks away, I guess I will go do the same. Thanks sir.

[Pdxseth]

I thought that was a 32mm

[JinormusJ]

WTB: thin wall 30mm socket

I just bought a POS Autozone impact rated socket for like $12 and ground it down. I'm not paying $30+shipping for an actual thin wall

Good luck

[Boise]

I used one of these:

http://www.amazon.com/Powerbuilt-648...erbuilt+648445

No grinding required and it worked great. I put it on my impact wrench and it had the tranny output shaft nut off in 15 seconds.

[dahows]

I have one, shoot me a text Austin.


Sent from my iPhone using Tapatalk

[Matt-B]

Me and josh made one also