Repost for ze locals.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ck_taft325is
    R3V OG
    • Sep 2007
    • 6880

    #1

    Repost for ze locals.




    ... let me know what you guys think. I've exhausted my knowledge on what to look at/for.

    There's two areas of concern for me:

    1. The squeak. You can hear it right as throttle is applied. Worse from the gas peddle as it's a bit smoother than pulling the throttle cable.

    2. The really rough running/idle and wanting to croak. It runs perfectly when you first start it beyond the squeal when you give it throttle and first start up.

    I've replaced the MAF, the boot, all of the mess under the intake, new HG, new plugs, new wires, new water pump, new intake gaskets, ICV's good, new belts all around (and tightened them appropriately), new timing chain tensioner, sprockets look great (as in nearly new), chain was perfect. I'm at a loss.

    Also, made sure the obnoxious cat/no cat wire was unplugged.

    Any ideas at all, please share 'em. I'm pretty tired of getting 9mpg in my '95 F150 going to to and from work

    Thanks in advance for your time.
    Need a part? PM me.

    Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123
  • BraveUlysses
    No R3VLimiter
    • Jun 2007
    • 3781

    #2
    Can you get a video of you playing with the throttle to see how it behaves when it chokes?

    Ever had the injectors cleaned or inspected? I can't quite put my finger on that quiet chirruping noise

    Comment

    • ck_taft325is
      R3V OG
      • Sep 2007
      • 6880

      #3
      Yeah, it's really throwing me off.

      I'll see about getting a video of it dying out.
      Need a part? PM me.

      Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

      Comment

      • Rennsport
        R3VLimited
        • May 2006
        • 2139

        #4
        My truck makes the same chirping noise and has been for two years. I doubt it has anything to do with the rough idle.
        m106 1990 e30
        e36 daily
        e32 cruiser

        Comment

        • e30austin
          I waste 90% of my day here and all I got was this stupid title
          • Sep 2010
          • 15382

          #5
          Time for a 24v.


          Comment

          • ck_taft325is
            R3V OG
            • Sep 2007
            • 6880

            #6
            Originally posted by Austin!
            Time for a 24v.
            Oh, I completely agree. The wife on the other hand? Not so much ;)
            Need a part? PM me.

            Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

            Comment

            • e30austin
              I waste 90% of my day here and all I got was this stupid title
              • Sep 2010
              • 15382

              #7
              Yolo?


              Comment

              • ck_taft325is
                R3V OG
                • Sep 2007
                • 6880

                #8
                Swapped ICV's. Fixed the rough/bad idle.

                Still a bit of a hesitation on throttle and the little chirp. No idea what the hell that chirp is but I'll just ignore it? ;)
                Need a part? PM me.

                Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

                Comment

                • BraveUlysses
                  No R3VLimiter
                  • Jun 2007
                  • 3781

                  #9
                  Italian tune up on that bitch! I beat my M42 like it owes me money

                  Comment

                  • ck_taft325is
                    R3V OG
                    • Sep 2007
                    • 6880

                    #10
                    Originally posted by BraveUlysses
                    Italian tune up on that bitch! I beat my M42 like it owes me money
                    I think that's the only real solution. Test drove it sideways around a new development with only roads and no houses. Was a fun little romp for the first time in 3 years.
                    Need a part? PM me.

                    Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

                    Comment

                    • ck_taft325is
                      R3V OG
                      • Sep 2007
                      • 6880

                      #11
                      Juuuust kidding. Motherfucker left me stranded just getting to the gas station.
                      Need a part? PM me.

                      Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

                      Comment

                      • iceman
                        Advanced Member
                        • Jan 2011
                        • 149

                        #12
                        The squeak sounds like a bearing on one of the pulleys, maybe the alternator.

                        For future reference, your car has an air flow meter (afm), not a maf.
                        Last edited by iceman; 10-25-2014, 02:34 PM.

                        Comment

                        • ck_taft325is
                          R3V OG
                          • Sep 2007
                          • 6880

                          #13
                          AFM, right. My bad?
                          Need a part? PM me.

                          Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

                          Comment

                          • Rennsport
                            R3VLimited
                            • May 2006
                            • 2139

                            #14
                            I think he was refering to the car as being a mother a** f*waffle
                            m106 1990 e30
                            e36 daily
                            e32 cruiser

                            Comment

                            • ck_taft325is
                              R3V OG
                              • Sep 2007
                              • 6880

                              #15
                              ^ Pretty much.


                              Still don't have this thing running reliably. Take shit apart and put it together? Boom, runs like a dream. No issues at all. The next day when I get the balls to run around and get it registered? Won't make it to the end of the street. I'm already looking at dropping new sensors all around on it. Coolant, CPS, etc. TPS is fine. AFM is fine as far as I can tell. ICV seems to be working just like the little bitch it is.

                              Heh, I'm $500 into this thing (not including what I owe Tom for the winter wheels) and I still don't have it in my name, heh.
                              Need a part? PM me.

                              Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

                              Comment

                              Working...