Miami FL people?

[Erick]

You'll have better answers if you asked that in the 24v swap forum

[ThaiRacer]

Does any1 in miami need a dent free alpine hood? 40 bucks picked up

[Under_Pressure]

You'll have better answers if you asked that in the 24v swap forum

I will just thought someone had done it here so I thought I would ask.

[my73bimmer]

I have 2 bottlecaps they need tires, and they are painted green. Will let them go for cheap, let me know if your interested.

hey, the person who was looking for those rims got a set.. thanks anyways.

[E-Thirty]

Anyone have any experience pulling a head from an m20b25? Is it worth it, or should I just replace the motor?

[fanjioe30]

Anyone have any experience pulling a head from an m20b25? Is it worth it, or should I just replace the motor?

i saw a head (still in motor about 3 days ago) on a red 87 325is the one at you looking at U-PICK in medley , it's almost new

[D-rock]

When are we having a meet!

[E-Thirty]

So nobody local with a good running m20b25 head?

[Vedubin01]

Does any1 in miami need a dent free alpine hood? 40 bucks picked up

What kind of condition is it in?

[ForcedFirebird]

Well guys, been plugging away at the flow bench. I know, I know haven't gotten to the 885 e30 casting yet, but have a client soon that will be needing a top end and matching cam from us soon, so we started plugging away at flow testing a port development for his set up.

The red line is stock flow (obviously lol), the second line is a common DIY'er port job done by me without any flow testing or removing much material. The thir line is after removing just over 5cc of material from the port. The port measured 25.3cc stock and opened them up to 131.8. Haven't CC'd the chambers yet (haven't de-shrouded the exh in the chamber yet), and still have a little detail guide work before polishing the high velocity areas.

Anyways, enough talking...




Now since flow benches are kind of like dynos, you can take the same car and the numbers will be slightly different from one place to the next depending on calibration, testing technique etc, so I put together a comparative flow sheet from database info...



Averaging 20%+ increase on these crappy stock iron domestic heads using the stock valve (nail head design, not even a tulip valve :(), and the port is only roughed out! Can't wait to see the total gain :)

-John

[Erick]

So cool! :D

[Under_Pressure]

Does anyone have a spare m50 maf they can sell me??

[silence]

Averaging 20%+ increase on these crappy stock iron domestic heads using the stock valve (nail head design, not even a tulip valve :(), and the port is only roughed out! Can't wait to see the total gain :)

-John

Nice, will you be at the shop after 5 today?

[my73bimmer]

Nice, will you be at the shop after 5 today?

Hello Carlos,,
Here is the info for the PCA Event at the Bank Atlantic center for the autocross event on Sunday.... try to see if they are still accepting more cars...

Last call for the season Finale
Registration is still open, for PCA event 7…The Season Finale. Please go to clubregistration.net, set up a profile, and register for the GOLDCOAST region Autocross. *Clubregistration .net is now the official registration site for PCA and uses PAY PAL for payment.* Paypal allows you to use a credit card or checking account for payment. If you get really stuck using this system please send me an e-mail with the concerns and I’ll work thru them with the site administrator. Here’s the details:….And welcome back
DATE: Sunday November 15,2009
TIME: Check-in and tech between 7:15-8:15, driver meeting at 9:45, first car out at 10:00
Place: BankAtlantic Center (lot D) 1 Panther Parkway Sunrise, Fl
Contacts: Steve/Dottie Kidd 954 946-3196
REMEMEMBER TO USE CLUBREGISTRATION.NET

[silence]

Rolando, thanks for the info, i will check.