i just posted in m20 section give it aead and let me know what your thoughts are?
-
-
Well, painted some stuff today. The hood and the front bumper. I was just about ready to beat everything with a sledge hammer half way through though.
Used some high build primer on the hood, but my spectacular harbor freight spray gun only works half of the time. So it will spray, then slowly die, then all of the sudden come back to life, making it very hard to get a good finish. It screwed up the hood pretty bad but I threw on some delphin afterwards just to see how it would look. I have a ton of work that needs to be done on the hood. Rust removal sucks and leaves a ton of marks:(
But the plastic bumper came out OK. When I resand and use a little filler it should be about perfect. It sucks working out in a sandy yard:hitler:
'73 2002 m20 turbo [sold] '87 rat rod 325is [couch modded] '91 vert [daily] '88 325is [spec build v1] '84 325 [spec build v2] '99 323i vert [sold]Comment
-
HF guns are tricky, have to practice on a scrap. How did you set it all up? Regulator and disposable dryer should be on the end of your gun...Originally posted by AbsorbantNut View Post
Took some pics of my dirty car :(
Comment
-
I practiced on a scrap fender a week ago and it came out pretty decent. I cleaned the gun after I finished. Then I went to use it today and it almost made me crazy. I set it up like so. Compressor-->hose---->gunOriginally posted by ForcedFirebird View Post
I think it has a regulator, if by regulator you mean an adjustable knob for air presure. If so, then it goes compressor-->regulator-->hose-->gun
Im not sure what a dryer would be either.......
'73 2002 m20 turbo [sold] '87 rat rod 325is [couch modded] '91 vert [daily] '88 325is [spec build v1] '84 325 [spec build v2] '99 323i vert [sold]Comment
-
Anyone have an LSD for sale. I have an M50 with G250 and maybe in the future going back to the G260, Im not sure what ratio would be best.
I also need a Brake Booster for a swapped car, (ix, 944,e21) mine is bad and I do not feel like slotting the firewall for the stock one...
Was that MTech II at the JY a Vert? I wish I found it complete, lolComment
-
The one I saw was a coupe. Also I know of someone selling a 4.10 LSD if that would work out for you. Not sure if the ratio would work with your specs.sigpic
Comment
-
Diamond Steelies Question.
I would like to have these steelies made for my car with these specs: 4x100, to fit 91 E30, 16x7, and I want to run 225/45/16 tires. What offset would i need to make this work. I have H&R race with Bilstein sports. Any help would be appreciated. Thanks......................G.Comment
-
Anyone have a straight rust free front subframe from a late model 325?sigpic
Comment
-
Daggum it.....take my whole car!!!!....Originally posted by 240zs30 View Post
You can dolly tow it to Miami.Comment
-
Sent you a PM......sigpic
Comment
-
Be careful of who builds your engine. As some of you guys know we are working on the white Camaro that's got 10k on a "crate" motor from a "reputable" rebuilding company.
We had to go through some things on the motor, and am glad we did. Here's what the bearings looked like when we opened it up...
Comment
-
No fun, been there before!Build your own dreams, or someone else will hire you to build theirs!
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
holy crap! No assembly lube, they didnt machine the crank, improper torque specs, reused bolts?Comment
-
More fuel pump problems! Hot-wired it to a toggle switch for now in the ash tray. Super thug set up status
'73 2002 m20 turbo [sold] '87 rat rod 325is [couch modded] '91 vert [daily] '88 325is [spec build v1] '84 325 [spec build v2] '99 323i vert [sold]Comment
Comment