Austin??

[dothadance]

wow. didn't know this thread was gonna jump so fast...

[navytapaul]

Its alive!

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[dothadance]

bumpsteer like a motherfucker. half way through swahbahr reinforcing.

[navytapaul]

Explain, pretty sure we are all confused

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[homegrone30]

"Ah I see"said the blind man. You decided it would be a good idea to remove your sway bar.

Sent from my SPH-L710 using Tapatalk 2

[el bimmer]

It should just swap everything over. Fuel gauge is different and you need to swap the coding plug too

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Thanks paul!

Is there a shop in the Austin, San Antonio area that is able to do an M3 swap? I am currently looking for a s50 engine (long-block), I already have the tranny.

[homegrone30]

I beleive terry sayther has done a few swaps. If I had room In my garage Id say I could but unfortunatly I cant.

Sent from my SPH-L710 using Tapatalk 2

[el bimmer]

I beleive terry sayther has done a few swaps. If I had room In my garage Id say I could but unfortunatly I cant.

Sent from my SPH-L710 using Tapatalk 2

Thats the problem I have! I have too much crap in my garage and I have to Keep my M3 indoors, otherwise I would do it. I might just put my car in storage once I get everything I need to do the swap and do it myself. I will look into Terry Saythers cause I will buy everthing myself and take it to him if he is resonable. Thanks!

[navytapaul]

I personally wouldn't pay anyone to do a m/s5x swap because they are very straight forward. Only hard part is the wiring, and Jt knows how to do that and he lives up by you. I know Terry Sayther is going to charge you an arm and a leg and a small child to do it. I have a engine stand and a cherry picker in my garage, but not a lot of tools.

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[el bimmer]

I personally wouldn't pay anyone to do a m/s5x swap because they are very straight forward. Only hard part is the wiring, and Jt knows how to do that and he lives up by you. I know Terry Sayther is going to charge you an arm and a leg and a small child to do it. I have a engine stand and a cherry picker in my garage, but not a lot of tools.

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

The electrical is what scares me the most. Do you know where JT is from? I stay in the Harker Heights by Fort Hood.

LOL I have a bunch of tools and no Cherry Picker, but I do have an engine stand. The swaps seems very straight forward. I also have a small child that just turn 4 today, so it will cost me an arm and leg only which seems reasonable. I already have a getrag 260 tranny, will need an s50 longblock. Hopefully here soon will have that as well

[glucklich21]

I'm J.T. and I'm in northwest Austin.

[navytapaul]

The electrical is what scares me the most. Do you know where JT is from? I stay in the Harker Heights by Fort Hood.

LOL I have a bunch of tools and no Cherry Picker, but I do have an engine stand. The swaps seems very straight forward. I also have a small child that just turn 4 today, so it will cost me an arm and leg only which seems reasonable. I already have a getrag 260 tranny, will need an s50 longblock. Hopefully here soon will have that as well

Found it: http://austin.craigslist.org/pts/3367466867.html

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[navytapaul]

I need to justify buying this, somebody buy my autotragic

http://austin.craigslist.org/pts/3372704244.html

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[homegrone30]

Damn! Thats a deal right there!

Sent from my SPH-L710 using Tapatalk 2

[navytapaul]

Somebody needs to buy that asap

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2