If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
So I was wondering how 17x8 et40 with 245/40-17 would work? I would have the 5-lug conversion from r3v. Side note: have you heard of anyone using the ground control 5-lug strut housings?
Looking to purchase a set of SSR Formula Mesh 16x7.5 they come in a range on offsets. +7,19,32,45,58. Have 205/45/16s tires on hand. But what's the best offset 19 all 4 corners? Thank you
Will these wheels fit directly or would I need to run spacers? I have 1990 325is on ground control coilovers. Anybody know how rare these Weds mesh wheels are? 15x7 ET +10
Hey guys i have a 1987 325e, and my friend gave me a set of e28 basket weaves for free, they are 15x7 et2, if i get a 5 lug adapter that's 33mm thick to match the stock offset will it work? will a 7 inch rim fit under an e30 fender with no problem given i get the wheel diameter to match the stock one? thanks!
I just read the begining of this thread where you mentioned not answering emails.. thanks for answering mine earlier! Can you eloborate on your answer a little more.
89 325i Ground control with camber plates.
I would like to have the tires tucked a little bit.
I have BBS RS 070
front 15x7 et 16
Rear. 15x7.5 et 10
Could I fit 205 50 tires front and back with a fender rolling (roll not pull)
Or could I go 205 50 in the rear and possibly at 195 55 in the front?
Or just play it safe and roll with 195/50s and dump it hahaha
Will these wheels fit directly or would I need to run spacers? I have 1990 325is on ground control coilovers. Anybody know how rare these Weds mesh wheels are? 15x7 ET +10
WEDS Racing Auto Banh Mesh Wheels. 15x7 +10, 4x100. Fully refurbished wheels that look amazing. Brand new hankook tires 205/50 Less than a month old!
I think I may be close to what you're trying to run. 15x7 et12 Rial Mesh. Spacers are needed to clear the front calipers. Can't recall what size I've got, came with the wheels, but there's about 1mm of clearance. A bit too close for comfort.
Thinking of buying a set of xxr 531 on 16s and this are my options
Front
16x8 +20
16x8 +0
Rear
16x8 +0
16x9 +0
I'm inclined on going for the 16x8+20 in front and 16x9+0 in the back. 205 in the front and 225 in the back. Would I need spacers? I'm fine with rolling the fenders would they rub even with rolled fenders?
Hi there Mystikal I have 1990 325i seating on Bilstein shocks and H&R OE sport springs. I have 17x8.5 et25 running 5mm spacer all around.
Can I fit 215/45 or 215/40
Or 205/45 is what I should order.
I have good amount of clearance between rim and fender.
First picture is the rear, second picture is the front.
Hey there, I have an early model, currently, on H&R Race springs with e90 drop hats and no spring pads in the rear... Im looking to order 16x8 +20 ESM 002r, my buddy is giving me his 225/45r16 R888's to put on them, I am also looking at getting my front fenders rolled on Monday so my question is, will the fit? and not have ugly poke or anything of sorts...
Comment