Announcement

Collapse
No announcement yet.

m44 and auto trans

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    m44 and auto trans

    I recently picked up an e36 1998 318ti that im stripping and building a "race car" out of and I have no use for the motor or trans..

    119k miles on both..

    owner was an older guy so it most likely wasn't beat on
    car did not run when I bought it (problem with the EWS) but everything looks good, fluids were clean etc..
    motors really clean, P/s had a leak but other then that doesn't look like motor its self has any leaks

    not sure which model the trans is but its made by GM

    $250 for the complete thing (I cut the harness, but ecu is included

    figured id give it a shot before I strip it and scrap it all

    im in Vineland Nj, bring a truck/trailer and ill load it for you

    PM or text 609 - five zero one - 2479
    IG: haggardfab
    Tags: None
    #2
    Originally posted by haggardfab View Post
    I recently picked up an e36 1998 318ti that im stripping and building a "race car" out of and I have no use for the motor or trans..

    119k miles on both..

    owner was an older guy so it most likely wasn't beat on
    car did not run when I bought it (problem with the EWS) but everything looks good, fluids were clean etc..
    motors really clean, P/s had a leak but other then that doesn't look like motor its self has any leaks

    not sure which model the trans is but its made by GM

    $250 for the complete thing (I cut the harness, but ecu is included

    figured id give it a shot before I strip it and scrap it all

    im in Vineland Nj, bring a truck/trailer and ill load it for you

    PM or text 609 - five zero one - 2479
    This is a screaming deal. Normally cant touch an M44 cyl head for $250
    You say "Where are your other two cylinders?"
    I say "Where's your other camshaft?"
    Frankenmotor: if an M42, M44, M20, S50, and S52 were to have a kid.

    Comment

      #3
      Ship?
      Renting my rear wheel bearing tool kit. SIR
      http://i25.photobucket.com/albums/c5...ps6debf0b0.jpg

      Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

      Comment

        #4
        Originally posted by benz-tech View Post
        This is a screaming deal. Normally cant touch an M44 cyl head for $250
        didn't think these things were worth anything..
        IG: haggardfab

        Comment

          #5
          Originally posted by ///M42 sport View Post
          Ship?
          I cant imagine that being anywhere near worth the money..
          IG: haggardfab

          Comment

            #6
            Originally posted by haggardfab View Post
            I cant imagine that being anywhere near worth the money..
            Had this been last year I'd have payed to ship it. I payed $550 for a local one that ended up with a cracked head. Had 200k on it too. If anyone wants to build at 2.0L with this I can help.
            You say "Where are your other two cylinders?"
            I say "Where's your other camshaft?"
            Frankenmotor: if an M42, M44, M20, S50, and S52 were to have a kid.

            Comment

              #7
              I wish you were local

              Comment

              Previous template Next
              Working...
              X