FS: 274 performance camshaft at a discounted price! ---SOLD!

[MR 325]

This is a 274 regrind performance cam from BimmerHeads.

This particular cam had a bit more wear than average prior to grinding so it's likely it will need oversize eccentrics on some of the valves to compensate for this. Nothing to be afraid of!

$190 shipped! SOLD!!!

PM me or email schwarze30 at gmail dot com

[MR 325]

Bump

[MR 325]

Bump for payday!

[einstein57]

If i didn't already have two. lol

[kistler#7]

Would this be worth it on a boosted engine? I was originally looking at the dual pattern. Also I was reading on your site that this increases lift as well as duration, how is lift increased in a regrind? Thanks

Sent from my SPH-L710 using Tapatalk

[MR 325]

Would this be worth it on a boosted engine? I was originally looking at the dual pattern. Also I was reading on your site that this increases lift as well as duration, how is lift increased in a regrind? Thanks

Sent from my SPH-L710 using Tapatalk

I am running this cam in my boosted M20 and have no complaints.

A reground cam gets more lift by reconfiguring the lobe and grinding from the base circle.

[kistler#7]

Ok makes sense. I am interested in this or one of your 274/280 grinds for a 2.7/hx35 build, but spool/lag is my biggest concern right now. Would either of these reduce lag with their increased overlap and lift? (that's what Ive understood about cams and fi)

[accident]

Can I have a sticker? <3

[MR 325]

Bump

[MR 325]

Price dropped. :)

[Julien]

are you taking a core on this or?

[phenryiv1]

Can you PM me a shipped price (to 25403) for this cam in a rebuilt 885 head? I was just on your site considering going that route for a rebuild versus a local shop and I was going to opt for a 274 cam if I go that route. A friend of mine bought one of your 885 rebuilds through a single-item post you had on here (as opposed to the link to your website) and he was very happy with it.

I have 2 complete 885 heads that I can send as cores, if you would want a second 885 to rebuild & sell. I got the second one to rebuild with a 274 cam but this route might be easier.

[MR 325]

are you taking a core on this or?

No core required but I'd still be willing to credit for one.

Can you PM me a shipped price (to 25403) for this cam in a rebuilt 885 head? I was just on your site considering going that route for a rebuild versus a local shop and I was going to opt for a 274 cam if I go that route. A friend of mine bought one of your 885 rebuilds through a single-item post you had on here (as opposed to the link to your website) and he was very happy with it.

I have 2 complete 885 heads that I can send as cores, if you would want a second 885 to rebuild & sell. I got the second one to rebuild with a 274 cam but this route might be easier.

Will PM you in a minute. Thanks.

[squidmaster]

How has this not sold yet? Great price!

[calypsorote30]

Will I need to put all oversized eccentric s on my valves for this regrind

Sent from my SPH-L720 using Tapatalk