Lots of stuff for sale. I'm happy to ship anything but some of the bulkier stuff is a pain so understand shipping is expensive, packaging costs money and I can't guarantee it'll go out 2 hours after I receive paypal if it's a pain in the ass item to ship.
1st of all I made a post yesterday about 4 lsd diffs I have. From now on I'll put everything in this thread but that ones already started and I can't change the title so here it is: http://www.r3vlimited.com/board/showthread.php?t=94809
there's a 3.73lsd, 4.10lsd, 3.91lsd small case and 3.07lsd from a 6 series
Also I ran out of characters in my 1st attempt to edit this post so I made a supplementary post here:
#1 - Really nice black vert top complete with frame.
sold
Zender side skirts. Painted white but it's not alpine white II, but pretty close. Paint is good, but unless your car is alpine they'll need a paint, and they aren't a perfect alpine match anyways.
$150 + shipping, looks like 30ish to east coast 40ish to west coast
9006 HID setup I bought from ebay. 5000k brightness. Bought 2 sets, one for me one for my dad's e36. The headlight housings on those SUCK so these were just a waste and I took em back. So they have about a week of use on em. I've been using mine daily for a year in US ellips and I love them, super bright no reliability issues for me so far. Plug n play, good to go.
$130 + ship
m50 injectors, light blue. 17 lbs i believe from researching it before.
$45 + ship
Complete m20 with 120k. Unfortunately didn't do a compression test on it before I yanked it. Came from a 87 325is with a bad auto trans and ran like a top. Motor is 100% complete, all accessories and manifolds are still there. Complete harness still attached, and i have a 173 or 153 ecu for it.
There was something goofy with 1 of the nuts for the front exhaust section being welded where it attached to the manifold. I'll snap a a picture and load it up shortly so you can see. If it looks easy enough to remedy I'll do it then, I had to get the motor out of the shell in a hurry so I just cut the pipes.
I also stole the oil level sensor cuz the wires tore out of mine, so it has a sensor there but it would have to be rewired. And I think I stole the coolant temp sensor trying to diagnose a problem with my other car, but I do have a good sensor that I'll put on the car.
PRICE DROP TO $350 picked up. Shipping/palletizing at your expense if you insist. Not gonna go a cent lower, i'm just gonna take the head off sell the pan and and junk the block probably, need the space but i understand m20s arent the most sought after motors in the world.
Rear headrest setup. Came from 87 325is, tan leather armrest seat back. I can pull the brackets out of the seat if you want it shipped or if you're local you're welcome to the whole seatback.
$PRICE DROP 50+ ship for just the headrest stuff or everything, whichever you prefer.
350mm momo wheel. Not sure of the model but it has 3 anodized spokes and a beefy leather rim.
$100 + ship
E30 steering wheel hub from bmp. Fits 6 bolt momo's and I'm sure more. Used for about 2 days, I didn't have a horn button on my momo so they failed my inspection, I put stock wheel on to pass and haven't bothered with the momo since.
$55 + ship
Momo hub #C 0157. Fits E12/E9/E21/M1
$35 + ship
Maplight mirror, great shape
$55 + ship
9/10 or better crack free dash board
pics to come
$150
[B]
More to come....
Plastic bumpers (listed, check other threads), millions of stock mechanical parts... PM me requests. If you are interested in anything above and want a package deal with regular stock replacement stuff to save on shipping just ask, I probably have it.
1st of all I made a post yesterday about 4 lsd diffs I have. From now on I'll put everything in this thread but that ones already started and I can't change the title so here it is: http://www.r3vlimited.com/board/showthread.php?t=94809
there's a 3.73lsd, 4.10lsd, 3.91lsd small case and 3.07lsd from a 6 series
Also I ran out of characters in my 1st attempt to edit this post so I made a supplementary post here:
#1 - Really nice black vert top complete with frame.
sold
Zender side skirts. Painted white but it's not alpine white II, but pretty close. Paint is good, but unless your car is alpine they'll need a paint, and they aren't a perfect alpine match anyways.
$150 + shipping, looks like 30ish to east coast 40ish to west coast
9006 HID setup I bought from ebay. 5000k brightness. Bought 2 sets, one for me one for my dad's e36. The headlight housings on those SUCK so these were just a waste and I took em back. So they have about a week of use on em. I've been using mine daily for a year in US ellips and I love them, super bright no reliability issues for me so far. Plug n play, good to go.
$130 + ship
m50 injectors, light blue. 17 lbs i believe from researching it before.
$45 + ship
Complete m20 with 120k. Unfortunately didn't do a compression test on it before I yanked it. Came from a 87 325is with a bad auto trans and ran like a top. Motor is 100% complete, all accessories and manifolds are still there. Complete harness still attached, and i have a 173 or 153 ecu for it.
There was something goofy with 1 of the nuts for the front exhaust section being welded where it attached to the manifold. I'll snap a a picture and load it up shortly so you can see. If it looks easy enough to remedy I'll do it then, I had to get the motor out of the shell in a hurry so I just cut the pipes.
I also stole the oil level sensor cuz the wires tore out of mine, so it has a sensor there but it would have to be rewired. And I think I stole the coolant temp sensor trying to diagnose a problem with my other car, but I do have a good sensor that I'll put on the car.
PRICE DROP TO $350 picked up. Shipping/palletizing at your expense if you insist. Not gonna go a cent lower, i'm just gonna take the head off sell the pan and and junk the block probably, need the space but i understand m20s arent the most sought after motors in the world.
Rear headrest setup. Came from 87 325is, tan leather armrest seat back. I can pull the brackets out of the seat if you want it shipped or if you're local you're welcome to the whole seatback.
$PRICE DROP 50+ ship for just the headrest stuff or everything, whichever you prefer.
350mm momo wheel. Not sure of the model but it has 3 anodized spokes and a beefy leather rim.
$100 + ship
E30 steering wheel hub from bmp. Fits 6 bolt momo's and I'm sure more. Used for about 2 days, I didn't have a horn button on my momo so they failed my inspection, I put stock wheel on to pass and haven't bothered with the momo since.
$55 + ship
Momo hub #C 0157. Fits E12/E9/E21/M1
$35 + ship
Maplight mirror, great shape
$55 + ship
9/10 or better crack free dash board
pics to come
$150
[B]
More to come....
Plastic bumpers (listed, check other threads), millions of stock mechanical parts... PM me requests. If you are interested in anything above and want a package deal with regular stock replacement stuff to save on shipping just ask, I probably have it.
Comment