Makes me sad, but another project forces sale:
For sale is my 1987 325is. The car is currently setup to run in time trial events and HPDE's but could easily be made ready for full race with the addition of the front cage, fire bottle, and a kill switch. The car works very well - balanced and light. The car is not street legal and will need to be trailered to events. This is a fantastic car to learn to drive track events in. It is very forgiving and drives like a go kart. Ready to run, needs nothing.
Sacrifice at $4250.00
1987 325is 5 speed
Conforti Software
Stock M20 Engine
Electric fan on manual switch
Straight exhaust with small muffler
4.10 rear end
Short shift kit
Full H&R cup kit, shocks
H&R sway bars
Sparco front strut bar
Rear strut bar
KMAC Camber plates set to -2.8 degrees
2 sets of wheels - 15x7's and 14" weaves both with Toyo RA1's
Hawk HT-10 Racing pads
AMB TranX260 Transponder
Momo steering wheel
1 Corbeau and 1 Sparco race bucket 5 point drivers harness, 4 point passenger harness
Autopower half cage
Bolt in Front splitter
Gutted and VERY light - sunroof removed, sound deadening, etc.
For sale is my 1987 325is. The car is currently setup to run in time trial events and HPDE's but could easily be made ready for full race with the addition of the front cage, fire bottle, and a kill switch. The car works very well - balanced and light. The car is not street legal and will need to be trailered to events. This is a fantastic car to learn to drive track events in. It is very forgiving and drives like a go kart. Ready to run, needs nothing.
Sacrifice at $4250.00
1987 325is 5 speed
Conforti Software
Stock M20 Engine
Electric fan on manual switch
Straight exhaust with small muffler
4.10 rear end
Short shift kit
Full H&R cup kit, shocks
H&R sway bars
Sparco front strut bar
Rear strut bar
KMAC Camber plates set to -2.8 degrees
2 sets of wheels - 15x7's and 14" weaves both with Toyo RA1's
Hawk HT-10 Racing pads
AMB TranX260 Transponder
Momo steering wheel
1 Corbeau and 1 Sparco race bucket 5 point drivers harness, 4 point passenger harness
Autopower half cage
Bolt in Front splitter
Gutted and VERY light - sunroof removed, sound deadening, etc.
My LS1 swap thread:
Comment