1987 325is Cinnabar red
Straight body with a key mark on passenger side and a few Small dings.
Brand new front tires
Stock weave's - missing spare
IE poly RTAB's and subframe bushings
E46 Rear Shock mounts
Black houndstooth doorcards
Black sport seats and black rear seats (all in "good" condition)
Beige carpet and headliner
1.5:1 steering quickener
Power steering Delete
New tierod ends and boots
A/c delete
14" pusher fan
535i radiator and hoses
Poly engine and trans mounts
Stock 535i Computer
"refreshed" 1988 m30b35 from 735i
All gaskets, seals, and timing components replaced with OE parts.
BMW timing chain (no master link)
21# injectors
3 bolt exhaust monifolds
Engine is painted pink (Started as a "you won't do it" and well...)
Getrag 265 from 535i
Just changed oil if that matters. Replaced with amsoil severe gear.
IE weighed short shifter
All shifter bushings, clips, and nylon washers are brand new.
Kentucky Clutch "stage 4" centered copper six puck clutch
M5 Flywheel
New slave cylinder and hydro line
WHAT THE CAR NEEDS:
The engine mounts are too tall and will need to be replaced with shorter ones for the hood to be aligned properly. I have new akg mounts (Motor and trans) that will come with the car to fix this problem.
Resistors for the blower motor need to be replaced. Blower motor works, but is out of the car.
Heater core needs to be hooked up.
Exhaust needs to be finished and o2 sensor installed.
There is a grimlin in the wiring for the drivers side blinker. It blinks like there is a bulb out for a few seconds, then doesn't blink at all.
The coolant guage needle jumps all over the place.
I can provide reciepts for all of the above items except the motor and trans as I picked them up from another enthusiast. I do have reciepts for the items that were replaced on the motor though.
I also have Brand new control arms and akg offset control arm mounts that will be included as well.
I drive this thing everyday, but it's a project for sure. Unfortunatly, I really need a small truck and just can't afford to get one and keep this car. I'll let the car and every part that I have for it go for $2400 or I'll consider trades on a small 4 or 6 cylinder, 5 speed pickup truck. (Ranger, s10, toyota, etc.)
Straight body with a key mark on passenger side and a few Small dings.
Brand new front tires
Stock weave's - missing spare
IE poly RTAB's and subframe bushings
E46 Rear Shock mounts
Black houndstooth doorcards
Black sport seats and black rear seats (all in "good" condition)
Beige carpet and headliner
1.5:1 steering quickener
Power steering Delete
New tierod ends and boots
A/c delete
14" pusher fan
535i radiator and hoses
Poly engine and trans mounts
Stock 535i Computer
"refreshed" 1988 m30b35 from 735i
All gaskets, seals, and timing components replaced with OE parts.
BMW timing chain (no master link)
21# injectors
3 bolt exhaust monifolds
Engine is painted pink (Started as a "you won't do it" and well...)
Getrag 265 from 535i
Just changed oil if that matters. Replaced with amsoil severe gear.
IE weighed short shifter
All shifter bushings, clips, and nylon washers are brand new.
Kentucky Clutch "stage 4" centered copper six puck clutch
M5 Flywheel
New slave cylinder and hydro line
WHAT THE CAR NEEDS:
The engine mounts are too tall and will need to be replaced with shorter ones for the hood to be aligned properly. I have new akg mounts (Motor and trans) that will come with the car to fix this problem.
Resistors for the blower motor need to be replaced. Blower motor works, but is out of the car.
Heater core needs to be hooked up.
Exhaust needs to be finished and o2 sensor installed.
There is a grimlin in the wiring for the drivers side blinker. It blinks like there is a bulb out for a few seconds, then doesn't blink at all.
The coolant guage needle jumps all over the place.
I can provide reciepts for all of the above items except the motor and trans as I picked them up from another enthusiast. I do have reciepts for the items that were replaced on the motor though.
I also have Brand new control arms and akg offset control arm mounts that will be included as well.
I drive this thing everyday, but it's a project for sure. Unfortunatly, I really need a small truck and just can't afford to get one and keep this car. I'll let the car and every part that I have for it go for $2400 or I'll consider trades on a small 4 or 6 cylinder, 5 speed pickup truck. (Ranger, s10, toyota, etc.)
Comment