These are a set of strut tubes that I have had for a few years. I was saving them to build into ground control coilovers. The right side one is in good shape, they have been sectioned and the perch for the adjuster has been welded on ready for the coilovers, I will cut this perch off and it will be finished just like the other side as I will need them for my other strut tubes and you will need a matching set.
The left hand side one is the one with a few issues it had a stuck shock insert, the side of the tube was cut and so was the bottom to release the insert it was cut down for the Perch to be welded on. When the shop removed the hub they saw that the threads on the shaft were rounded a little and I would have to rethread it. I have other sets of strut tubes so I am just going to use another set and sell these.
They include the lower knuckles and I will also include the hubs, although not shown I will include what was there and they have no rust and appear to be straight. The left one could be rethreaded and welded up and I am sure it will be fine. Check out the pics and let me know if interested
If you are not interested please refrain from negative comments. Thanks
PICS
FullSizeRender by Benn Benn, on Flickr
IMG_1831 by Benn Benn, on Flickr
IMG_1832 by Benn Benn, on Flickr
IMG_1833 by Benn Benn, on Flickr
IMG_1834 by Benn Benn, on Flickr
IMG_1835 by Benn Benn, on Flickr
IMG_1836 by Benn Benn, on Flickr
IMG_1837 by Benn Benn, on Flickr
IMG_1838 by Benn Benn, on Flickr
IMG_1839 by Benn Benn, on Flickr
The left hand side one is the one with a few issues it had a stuck shock insert, the side of the tube was cut and so was the bottom to release the insert it was cut down for the Perch to be welded on. When the shop removed the hub they saw that the threads on the shaft were rounded a little and I would have to rethread it. I have other sets of strut tubes so I am just going to use another set and sell these.
They include the lower knuckles and I will also include the hubs, although not shown I will include what was there and they have no rust and appear to be straight. The left one could be rethreaded and welded up and I am sure it will be fine. Check out the pics and let me know if interested
If you are not interested please refrain from negative comments. Thanks
PICS
FullSizeRender by Benn Benn, on FlickrIMG_1831 by Benn Benn, on FlickrIMG_1832 by Benn Benn, on FlickrIMG_1833 by Benn Benn, on FlickrIMG_1834 by Benn Benn, on FlickrIMG_1835 by Benn Benn, on FlickrIMG_1836 by Benn Benn, on FlickrIMG_1837 by Benn Benn, on FlickrIMG_1838 by Benn Benn, on FlickrIMG_1839 by Benn Benn, on Flickr
Comment