Early 318 front springs

[rkettner]

Looking for the m10 powered e30 front springs. They share the same part number with the m3.

http://www.realoem.com/bmw/partxref....eur=&details=1

Shipping to either Vancouver,bc or Blaine Washington 98230

[Holland]

Definitely not the same as E30 M3 springs.

[rkettner]

That's what I was thinking but the part number cross references.

[Holland]

The M3 springs should lower you about an inch and a half or so, the 318 springs should do the exact opposite.

[Dj Buttchug]

I have late model 318i springs... is there a difference??

[Todd Black 88]

I think it needs to be from a non ac car also.

[e30m20TurbO7]

WRONG the 318i spring is exactly the same at the m3 one
due to weight the m3 sits lower

[reelizmpro]

This is a fishy topic. The part numbers may be the same today but I don't think they are actually the same springs. That part number also references 325e's. Early 318i's and 325e's do NOT use the same springs. When you put 325e springs on a 318, it lifts it up a good 2-3". Those early springs also sat higher as well. The M3 spring or M Technic spring has one less coil and a lower height. The Bentley has all the spring specs. In other words, if u order the springs New today, they will probably be m3 springs. This doesn't mean that original springs from a 318 are the same.