Brand New 16x7.5 ET 25 ESM BBS RS Style Rims(NOT KONIG)

[Jand3rson]

These wheels are 19 lbs and we are the sole importer of these wheels. ESM is our new wheel line.

2 lbs. heavier than Remembers, too.

Never heard of ESM, reputable company?

Any chance of these coming in a 16x8 or 16x9 with a larger lip at any point?

I really can't see putting anything smaller than a 2.25-3" inch lip on the back and being happy with it, these would be fine for the front.

If they will eventually come in larger widths with a bigger lip you've got your first customer for those.

Same. If these end up coming in a wider width, I might just have to swap out.

[MR 325]

Ary, these wheels look great. Any pictures without the center caps available? Also, any pics mounted on an E30 yet?

[VacMan]

Great looking wheels! I love the flatter face, and the lower profile center cap, but I don't like the holes in the corners of the cap, or that the lips are so high-polish. The offset of the Remembers is better though, ET20 rather than 25. What's the weight on them, and who is the manufacturer?

They're ET25 because the wheel is 1/2" wider than the Remember. 1/2" = 12.7mm, so to be the same offset as the Remember they'd be ET26.35. Technically, these have a lower total offset that the Remember, or a more aggressive (wider stance) fitment.

Tim

[Jand3rson]

Ah yes, good point.

[ian e30 318is]

+1 for pics from the side.

[george graves]

+1 for pics from the side.

And good Sir - a pic of the cap off - as many of us like to run wheels WITH OUT caps at times.

[drifty340i]

Mate they are hot! good on you for inporting them. Im sure they will sell well. I need them in 16x8.5 if im going to change from my schnitzers

[Mystikal]

For the record, these are PERFECT for running 225/45/16 tires on an E30 without even rolling the fenders. Great fitment.

Or, if you want the Euro-poke and stretch thing, run 15mm spacers with 195/50/16 tires.

Jay

[eko]

I have these same wheels fitted to my project E30.
Mine are badged as Lenso,wether that is the original maker or not im not sure.
Ill get some pics up in a couple of hours :)

[Tavern Gnome]

I have these same wheels fitted to my project E30.
Mine are badged as Lenso,wether that is the original maker or not im not sure.
Ill get some pics up in a couple of hours :)

Like these??

[golde30]

^except they only made up to 16x7 from what i can find. looks pretty similar though.

[eko]

Heres a few shitty pics to give you an idea of what they look like fitted.
Drop is 60/40 H&R but the front still needs to settle as its only been on a couple of days.
Tyres are 205/45/16 Toyo T1R although wish id have gone for 225`s now.
These are 7 1/2 x 16".

Not a fan of the bolts in the centre nut myself but have a mate who is an expert with a tig set so was planning on asking him about welding them up and polishing back.
Also got a set of 50mm domed roundels on order.

[george graves]

[EDIT] Read below...

[widebodye30]

Our rims are not the same as those rims. Ours are 4x100 only. We will end up making the stagg. rear in 8.5 in the near future.

[widebodye30]

The konig wheels are 18.5 lbs and our wheels are 19.0lbs.