Spacers and Adapters....100% custom

[dinanm3atl]

so with the 4x100 to 5x120 adaptor, what kind of ET would i be looking for in a wheel that would actually work with an e30? i still trying to learn how it all works and everything. how it adds and subtractors from spacers and everything

I run a 16x8 et20 wheel now that is 4x100. 225.45.16 and it is tucking in the back and not very low in the front(IE3 springs). So if you go with the 20mm adapter style you would probably want a wheel somewhere in the ballpark of et40 to et50 as the offset of the wheel itself. Basically a lot of E36/E46 'standard' fitment would be good. This will set you up with an et20-et30 wheel. Run a 215 or 225 and should be pretty golden. If you are willing to stretch tires and run 205s or similar you could have your final et down in the 10s... depends on wheel width as well though so consider that.





*edit edit*

Found it in post 108... seems you bolt the 'dual bolt circle' to the car. That gives you a place to put the lugs.... if I get a full kit for an E30 that is 4x100 to 5x120 20mm does it come with lugs for the 5 lug wheels? Total cost?

OP,

Can you explain as best as possible how the 4x100 to 4x120 works. I see the photos. I sort of understand but really don't... Sorry if that is confusing. Photo of it mounted to the hub without a wheel on it? Have my eye on some 5x120 wheels for my e30 just to run as 'street' wheels and very interested.

Is 20mm the smallest/thinnest available? Thanks for the information and setting this up!

[cybourg13]

so with the 4x100 to 5x120 adaptor, what kind of ET would i be looking for in a wheel that would actually work with an e30? i still trying to learn how it all works and everything. how it adds and subtractors from spacers and everything

[e30Rob]

So, say I want some DSIIs - what adapters would I need? Price?

You would need the overlapping PCD adapters(4x100-5x120) that are 325+shipping jsut like listed on the original post....:D

[Turf1600]

So, say I want some DSIIs - what adapters would I need? Price?

[e30Rob]

Robert,

Thanks for the kinda words and the pics...there have been some guys askin for pics. Get back to use all after some track fun.



NEW NEWS!!!!

Renting fender roller.

$250 100% refundable security deposit.

$50 for a week + $20 shipping.

[monty23psk]

Thanks. Need to take some measurement with the rim I want and hopefully this will work. Maybe I can by one from Rob to make sure. Will see.

[RickSloan]

you should be fine, maybe even without a fender roll. I only had to roll mine a little to fit them but my offset ended up on the otherside of zero

[monty23psk]

finally a review
i finally recieved and installed my

4x100 to 5x120 adapters
20mm front and rear
wheels are enkie 92's 16x7 with et11 offset

adapters came well packaged and everything was there. I installed lug studs and acorn nuts. Everything fits well and flush. Overall i am very happy with. I'll be using them in auto cross and track events and will come back with more reviews after. So far i have done 100+ and everything is smooth as glass

overall my experience with Rob was interesting bt in the end he is a really good guy and helped me out as much as he could. I am all about supporting the community and would buy again. Thank you for your help Rob hope you like the pictures. I couldnt be happier with how the car looks!

Did you have to roll your fenders? I am hoping for fit 20mm offset wheels and dont think they will make it. Plust they will be 16x7.5. Your car does look good with them.

[RickSloan]

finally a review
i finally recieved and installed my

4x100 to 5x120 adapters
20mm front and rear
wheels are enkie 92's 16x7 with et11 offset

adapters came well packaged and everything was there. I installed lug studs and acorn nuts. Everything fits well and flush. Overall i am very happy with. I'll be using them in auto cross and track events and will come back with more reviews after. So far i have done 100+ and everything is smooth as glass

overall my experience with Rob was interesting bt in the end he is a really good guy and helped me out as much as he could. I am all about supporting the community and would buy again. Thank you for your help Rob hope you like the pictures. I couldnt be happier with how the car looks!

[e30Rob]

all current orders ship tomorrow...again sorry for the delay....all issues debugged tracking will be provided.

[e30Rob]

I believe it's 72.56

[cbouchez]

Question for you any of you guys running E36 wheels on a E30.

I'm ready to place an order.

Did you guys get"

4x100 - 5x120 adapter

What center hub size did you get? Or did you just get the rings?

E30 57.1
E36 72.1 ???

thank you guys!

[e30Rob]

Will I need extended bolts for a 5mm spacer?

you alot of people so no and alot say yes. I will be honest I've ran 5mm spacers w stock lugs before.

Gonna need a set (2) of 8MM spacers, hucentric for a set of bortbet T's 4X100. Whats your turn around time for something like that?

----------------------------------------------------------------------
DAMN PAYDAYS!!!

I will be complty honest, if your looking for something along the custom lines then we are the guys to see. Typically tuned around times are 2-3 weeks due to these being custom built to each order and your specs.

PM sent

Pm returned

[cbouchez]

PM sent

[ikkitousen]

Gonna need a set (2) of 8MM spacers, hucentric for a set of bortbet T's 4X100. Whats your turn around time for something like that?

----------------------------------------------------------------------
DAMN PAYDAYS!!!