UPDATE August 27, 2021 - CONSIDERING - Any interest?
UPDATE JULY 17, 2021 - CLOSED
UPDATE April 8, 2021 - 10 on the list now
UPDATE April 5, 2021 - More renewed interest an das of 1today 5 people on the list.
UPDATE October 29, 2020 - CLOSED
UPDATE September 23 - people are clamoring so I will run it one more time.
UPDATE August 1 2020 - CLOSED
UPDATE 6/29/2020 IT IS TIME TO PLACE YOUR ORDER. go to the Stromungexhaust.com This morning Scott said " I will keep an eye open for these group buy guys just have them write group buy at the bottom of the page." This will ensure you get the group buy price. Also ask any other specific questions you may have about shipping or anything else.
UPDATE 6/28/2020 - We are past the 10 needed for the group buy ALREADY ! I reached out to Scott via email today. You can still join in, PM Me with your info: location, 318 or 325 and tip type. Single or double wall exhaust tips.
UPDATE 6/24/2020 - OK there is renewed interest AGAIN. Please respond or PM to me if you want to be added.
UPDATE 02/28/2020- There has been renewed interest. If 10 people want this setup, read below and then add your name to the list.
If you want to join, reach through this thread, go to the Stromung website, place your order and in the comment section, indicate single or dual wall, straight or angle tip AND that you are part of the R3VLimited Group Purchase
Disclaimer: I do not work for Strömung. I am simply organizing a group buy to get the same discount as everyone else.
UPDATE 11/16/19: Scott had received 3 - 4 orders so far. He will need to receive the majority of the orders to get started with manufacturing. So, as soon as you can, follow the instructions above and place your order.
http://www.stromungexhaust.com/325i-...rder-only.html
Thank you
UPDATE (8/15/2019)
This Group Buy is now RE-OPENED !!
UPDATE 11/7/2019 I spoke with Scott a few minutes ago. There are basically 3 choices. In the begining Stromung made cat back mufflers for E30 M3.
Choice 1: They were dual walled perforated tip. they look cool and will work on 325i or iS. Similar with only one tail pipe for the 318i or iS
Choice 2: If you have an M Tech the valence requires a longer exhaust tip - this is angle cut but not dual wall.
Choice 3: The stock look, angle or slash cut. Again this will be "hollow" not dual wall. It will resemble stock.
Scott agreed to another GROUP BUY, same as last time.
Strömung Catback 318i/is and 325i/is (August 16 2019)
Ends when we get 10 orders
I've reached out to Scott at Strömung to get another group buy going. This one is specific to the 318i/is and and 325i/is.
Scott has been very helpful. As per previous group buys, we need 10 committed and the price will be $399 ($80 off the $479 retail) for the 318i/is system, $565 ($100 off the $665 retail) for the 325i/is system. Shipping will vary, which in the past has been around $40 in addition to the cost of the exhaust. Shipping to BC, Canada is available according to the last group buy.
Once 10 people have committed for the 318i/is and/or 325i/is system, there will be instructions to go to Strömung's website and submit the order referencing this group buy. After placing an order Strömung will contact you directly with shipping costs and time table.
Please PM me and I will add you to the list:
UPDATE JULY 17, 2021 - CLOSED
UPDATE April 8, 2021 - 10 on the list now
UPDATE April 5, 2021 - More renewed interest an das of 1today 5 people on the list.
UPDATE October 29, 2020 - CLOSED
UPDATE September 23 - people are clamoring so I will run it one more time.
UPDATE August 1 2020 - CLOSED
UPDATE 6/29/2020 IT IS TIME TO PLACE YOUR ORDER. go to the Stromungexhaust.com This morning Scott said " I will keep an eye open for these group buy guys just have them write group buy at the bottom of the page." This will ensure you get the group buy price. Also ask any other specific questions you may have about shipping or anything else.
UPDATE 6/28/2020 - We are past the 10 needed for the group buy ALREADY ! I reached out to Scott via email today. You can still join in, PM Me with your info: location, 318 or 325 and tip type. Single or double wall exhaust tips.
UPDATE 6/24/2020 - OK there is renewed interest AGAIN. Please respond or PM to me if you want to be added.
UPDATE 02/28/2020- There has been renewed interest. If 10 people want this setup, read below and then add your name to the list.
If you want to join, reach through this thread, go to the Stromung website, place your order and in the comment section, indicate single or dual wall, straight or angle tip AND that you are part of the R3VLimited Group Purchase
Disclaimer: I do not work for Strömung. I am simply organizing a group buy to get the same discount as everyone else.
UPDATE 11/16/19: Scott had received 3 - 4 orders so far. He will need to receive the majority of the orders to get started with manufacturing. So, as soon as you can, follow the instructions above and place your order.
http://www.stromungexhaust.com/325i-...rder-only.html
Thank you
UPDATE (8/15/2019)
This Group Buy is now RE-OPENED !!
UPDATE 11/7/2019 I spoke with Scott a few minutes ago. There are basically 3 choices. In the begining Stromung made cat back mufflers for E30 M3.
Choice 1: They were dual walled perforated tip. they look cool and will work on 325i or iS. Similar with only one tail pipe for the 318i or iS
Choice 2: If you have an M Tech the valence requires a longer exhaust tip - this is angle cut but not dual wall.
Choice 3: The stock look, angle or slash cut. Again this will be "hollow" not dual wall. It will resemble stock.
Scott agreed to another GROUP BUY, same as last time.
Strömung Catback 318i/is and 325i/is (August 16 2019)
Ends when we get 10 orders
I've reached out to Scott at Strömung to get another group buy going. This one is specific to the 318i/is and and 325i/is.
Scott has been very helpful. As per previous group buys, we need 10 committed and the price will be $399 ($80 off the $479 retail) for the 318i/is system, $565 ($100 off the $665 retail) for the 325i/is system. Shipping will vary, which in the past has been around $40 in addition to the cost of the exhaust. Shipping to BC, Canada is available according to the last group buy.
Once 10 people have committed for the 318i/is and/or 325i/is system, there will be instructions to go to Strömung's website and submit the order referencing this group buy. After placing an order Strömung will contact you directly with shipping costs and time table.
Please PM me and I will add you to the list:
Comment