Group buy: Subwoofer boxes

[Skoobeesnak]

A few more pictures and a question for Luk

Here are a few pictures of the ports and how they fit with the premium sound rear speaker holes. I had to trim about 1/2" from the tubes to get them to fit within the grills. I think Luke made them a little long to make up the gap that would have existed if I had removed the trunk tar material in any case it wasn't a big deal at all. The question I have is, how did you get the "pretty panel" as you called it to set off of the sub box? Are you using some sort of standoff or spacer? Oh and how do I embed pictures in my post so people don't have to load each pic?

[StereoInstaller1]

Oh shit! You were supposed to put the port panel ON TOP of the speaker panel...under the metal mesh!

Oh well. The "Pretty Panel" simply fits the back of the box, no spacing required...unless you want to flush mount your amps. What I do is make the panel press fit by having it mount tightly against the amps. Cutting them is a PITA, but it is nice.

The little yellow icon above the text window is the "picture embed" button. Paste the URL of the pic in there.

[Skoobeesnak]

Damn, oh well it still sounds awesome I couldn't be happier with the sub box and Luke's workmanship and I don't think I will need to glue the metal screens down to the enclosure.

[Rodoni]

Would it be possible to bassically buy the box that browntown has with the two amps installed on it? How much?

[StereoInstaller1]

Would it be possible to bassically buy the box that browntown has with the two amps installed on it? How much?

The only question is what 2 amps...the Titanium Powers are great, but cheap. If you want the finished panel, shipping would be a hassle, that is why I include upholstery material and a template to make your own back panel.

Luke
Oh yeah...YGPM.

[Rodoni]

The titanium 100.4 and the 150.2 + box...and this wouldnt work on a cabby correct?

[StereoInstaller1]

The titanium 100.4 and the 150.2 + box...and this wouldnt work on a cabby correct?

Co-rekt.

I will check your cost out on those 2 amps. I think you might be better served with the 500.1 sub amp though. It likes a 2 ohm load, so most DVC woofs are perfect.

Luke

[Rodoni]

hmmm..i might be trading for a cabby, but i wont know until saturday for sure. do you have any ideas for a good setup for a cabby just in case?

ps: browntowns trunk is sexy

[StereoInstaller1]

thanks..he has not seen it yet.

CovallisBMW has a cabby he is SUPPOSED to be dropping off for a year or two so I can doo-do a cabby and make a big killing on subwoofer boxes that take me half a day to make, use $40 in materials and sell for $150...

[Rodoni]

Hes suppossed to do it soon? So you should have a set up soon you think? itd be nice if you could use the same box...in that case i would take one right now lol. we'll see :)

[CorvallisBMW]

I guess I'd better do it soon then :)

srsly as soon as I can get a seat to put in it, I will drive it down to you. maybe I can borrow one from Joe.....

[StereoInstaller1]

I guess I'd better do it soon then :)

srsly as soon as I can get a seat to put in it, I will drive it down to you. maybe I can borrow one from Joe.....

I have a spare seat sitting around...passenger seat from a sedan, or a pair of Sports you can borrow for a few.

And I would hazard a guess that the cabby box will be completely different.

[CorvallisBMW]

I will be happy to leave it with you as long as you need it, i just need to find a way to get it down there since in Portland right now. Let me get back to you

[DrMcDave]

hey what is the going rate right now...IE how many boxes do you have sold?

[golde30]

bumpy! whats up Luke? shop got busy again? if so, then im glad, but if not, git er done! LOL