>>>>>> MarkD Performance Chips!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • xLibelle
    replied
    great question. obviously Mark should answer, but my guess is it wont hurt. for all safety purposes, i wouldnt romp on it though.
    I am currently running a 91 chip (AA) and have tanked a few times with 89 without problems but its not a MarkD 93 tune so it could be a different story. But first uneducated guess is it should be ok.
    I will be forced to fill on 91 octane as well at times, but my primary intent is to be at 93 or higher whenever possible.

    Leave a comment:


  • Kilomph
    replied
    If I get the 93 Octane will there be any harm in mostly running 91 Oct? Probably 50% of the time I'd be running 91, I can't imagine there being that big of a difference, just wondering. There are plenty of 93 V-Power shells in my area, while gas prices are low I wouldn't mind paying the extra .08 for it.



    1. Kilomph - r3v (PAID)
    2. Alkasquawlik - r3v
    3. Libelle - (PAID)
    4. Davey - bfc
    5. 1995M3LTW - bfc (possibly 2)
    6. Alkasquawlik's brother - (for a 528e if possible)
    7. hi its me alec - bfc
    8. E30fiend - r3v
    9. kamotors - r3v
    10. z31maniac - r3v
    11. VacMan (committed to one on M42Club, but I assume this GB supersedes that one.)
    12. Vonkamp M42/r3v
    13. CDBE30 - bfc (PAID)
    15. hottnikkz (2 chips) - bfc
    16. driz - r3v (PAID)
    17. DragonOrta - r3v
    18. blkbox - r3v
    19. drivnovrdaedge- r3v

    Leave a comment:


  • xLibelle
    replied
    PAID to obtain the extra 3%.
    Part of my purchse is to support this guy in his endevor to help the e30 world, in spite of assholes that steal his code.
    I got the 93 octane version because my stations have it... hope its still part of the GB.

    1. Kilo - r3v (paid)
    2. Alkasquawlik - r3v
    3. Libelle - (PAID)
    4. Davey - bfc
    5. 1995M3LTW - bfc (possibly 2)
    6. Alkasquawlik's brother - (for a 528e if possible)
    7. hi its me alec - bfc
    8. E30fiend - r3v
    9. kamotors - r3v
    10. z31maniac - r3v
    11. VacMan (committed to one on M42Club, but I assume this GB supersedes that one.)
    12. Vonkamp M42/r3v
    13. CDBE30 - bfc (PAID)
    15. hottnikkz (2 chips) - bfc
    16. driz - r3v (paid)
    17. DragonOrta - r3v
    18. blkbox - r3v
    19. drivnovrdaedge- r3v

    Leave a comment:


  • Kilomph
    replied
    Get that extra 3% and pay by Saturday!

    Leave a comment:


  • z31maniac
    replied
    I'm paid up.

    Get on this guys!

    Leave a comment:


  • drivnvordaedge
    replied
    1. Kilo - r3v (paid)
    2. Alkasquawlik - r3v
    3. Libelle - r3v
    4. Davey - bfc
    5. 1995M3LTW - bfc (possibly 2)
    6. Alkasquawlik's brother - (for a 528e if possible)
    7. hi its me alec - bfc
    8. E30fiend - r3v
    9. kamotors - r3v
    10. z31maniac - r3v
    11. VacMan (committed to one on M42Club, but I assume this GB supersedes that one.)
    12. Vonkamp M42/r3v
    13. CDBE30 - bfc (PAID)
    15. hottnikkz (2 chips) - bfc
    16. driz - r3v (paid)
    17. DragonOrta - r3v
    18. blkbox - r3v
    19. drivnovrdaedge- r3v

    ill pay for it this weekend ... will he give a bigger discount since there is a even larger turnout ?

    i think this is the install instruction

    Leave a comment:


  • CDBE30
    replied
    Hello all, finally registering here from BF.c - just wanted to make sure I was on the list here as well as there, as I ordered mine this evening. It seems I am.

    Thanks,
    Chase

    Leave a comment:


  • Alkasquawlik
    replied
    Originally posted by MikesJo
    I'm going to check this weekend and see if the car has been chipped or not. How would I be able to tell?

    If I don't have a chip, I'm in :).
    you most likely already have a chip installed...a stock chip that is.
    get an upgraded one.

    Leave a comment:


  • Alkasquawlik
    replied
    Originally posted by drivnvordaedge
    man .. im thinking about purchasing one ...

    how does install work on it?
    theres a DIY on pelican parts

    Leave a comment:


  • blkbox
    replied
    I am in for one as well!

    1. Kilo - r3v (paid)
    2. Alkasquawlik - r3v
    3. Libelle - r3v
    4. Davey - bfc
    5. 1995M3LTW - bfc (possibly 2)
    6. Alkasquawlik's brother - (for a 528e if possible)
    7. hi its me alec - bfc
    8. E30fiend - r3v
    9. kamotors - r3v
    10. z31maniac - r3v
    11. VacMan (committed to one on M42Club, but I assume this GB supersedes that one.)
    12. Vonkamp M42/r3v
    13. CDBE30 - bfc (PAID)
    15. hottnikkz (2 chips) - bfc
    16. driz - r3v (paid)
    17. DragonOrta - r3v
    18. blkbox - r3v

    Leave a comment:


  • 318isbmw
    replied
    Originally posted by MikesJo
    I'm going to check this weekend and see if the car has been chipped or not. How would I be able to tell?

    If I don't have a chip, I'm in :).
    revlimiter at 6500 not 7200 is easy way. Otherwise pull ecu and open it up and look, it'll say somethin on the chip.

    Leave a comment:


  • MikesJo
    replied
    I'm going to check this weekend and see if the car has been chipped or not. How would I be able to tell?

    If I don't have a chip, I'm in :).

    Leave a comment:


  • DragonOrta
    replied
    I'm in for one.


    1. Kilo - r3v (paid)
    2. Alkasquawlik - r3v
    3. Libelle - r3v
    4. Davey - bfc
    5. 1995M3LTW - bfc (possibly 2)
    6. Alkasquawlik's brother - (for a 528e if possible)
    7. hi its me alec - bfc
    8. E30fiend - r3v
    9. kamotors - r3v
    10. z31maniac - r3v
    11. VacMan (committed to one on M42Club, but I assume this GB supersedes that one.)
    12. Vonkamp M42/r3v
    13. CDBE30 - bfc (PAID)
    15. hottnikkz (2 chips) - bfc
    16. driz - r3v (paid)
    17. DragonOrta - r3v

    Leave a comment:


  • xLibelle
    replied
    nope. pull old one, push new one

    Leave a comment:


  • drivnvordaedge
    replied
    i think he skipped one because it looks like he is going to purchase 2 of them

    i was just wondering if it needed soldering in any way into it ...

    Leave a comment:

Working...