>>>>>> MarkD Performance Chips!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • E30_fiend
    replied
    Originally posted by Kilomph
    Search: Mustang 19lb and you'll get a ton of results. Apparently there are two different types, I'm hoping mine is the (?) 4 pintle version, not really sure how to tell.
    if you look at the spraying side of the injector, on a single pintle injector you will see just one small tip on the bottom. With the 4 pintle injector you will see four very small holes on the bottom.

    I have a set of green top 4pintle injectors cleaned up with new o-rings if anyone would like to take them off my hands as well as I have 19lb or orange top 4 pintle injectors as well with new o-rings.

    Leave a comment:


  • MarkD
    replied
    Originally posted by drivnvordaedge
    how much was the refund did we get? .. anyone else get the refund?

    i hope its enough to cover for an m30 afm ... argg .. need to pay the guy soon on ebay

    Send me an email with your name and I'll send your refund tonight. I can't figure out from the order list who you are, especially as there is no order from anyone in WA that I can see.

    Thanks,

    Mark
    Last edited by MarkD; 11-30-2008, 05:53 PM.

    Leave a comment:


  • MarkD
    replied
    Originally posted by drivnvordaedge
    how much was the refund did we get? .. anyone else get the refund?

    i hope its enough to cover for an m30 afm ... argg .. need to pay the guy soon on ebay
    The refund is 21% of $229 USD = $48 USD, I sent ity out to everyone who ordered by Nov 21. Everyone else will get the refund in the next two days (21%) I just didn't have time to send them all. Actually I only got about 30% of the tasks I had to do today done, so I'll be writing code till way past midnight.

    Leave a comment:


  • drivnvordaedge
    replied
    how much was the refund did we get? .. anyone else get the refund?

    i hope its enough to cover for an m30 afm ... argg .. need to pay the guy soon on ebay

    Leave a comment:


  • rwh11385
    replied
    Originally posted by iXBeater
    Really interested, but 2 questions:

    I've already got the TMS/Conforti chip - can anyone contrast the 2?

    Are the 19# injectors something I can easily pull from a car (and which one?) in the yard or is it something inexpensive enough that I can just grab new?

    Thanks!
    Summary is as follows: Ebay <<< Dinan < Jim C << Mark D



    This is a fantastic chip. Definitely blows JC away, especially from 5K+.

    This was one of the first Mark D 93 octane chips in the country, about a year and a half ago. I am a rare member who has had a Dinan, JC, and Mark D chip and can say from personal experience this one is most superior out of those three.

    The first burn 93 octane chip works best with 17 or 19 lb injectors (m50/s50, or mustang 5.0 ones). My 93 octane chip and 17lb injectors made more power than the JC and M30 AFM and 19 lb injectors. Redline is programmed at 6950.
    19# injectors are easy to find for cheap, but I'd recommend the 17.5# from an S50. Your call. Mystikal is a fan of 4pintle S50 injectors as am I.

    Leave a comment:


  • Kilomph
    replied
    Search: Mustang 19lb and you'll get a ton of results. Apparently there are two different types, I'm hoping mine is the (?) 4 pintle version, not really sure how to tell.

    Leave a comment:


  • DragonOrta
    replied
    Originally posted by iXBeater
    Really interested, but 2 questions:

    I've already got the TMS/Conforti chip - can anyone contrast the 2?

    Are the 19# injectors something I can easily pull from a car (and which one?) in the yard or is it something inexpensive enough that I can just grab new?

    Thanks!
    As soon as I get a 173 ecu, I'll be able to contrast them. I've to the 153 ecu and TMS chip.

    You should be able to get 19# injectors off ebay for $50 or so. That's where I got mine.

    Leave a comment:


  • iXBeater
    replied
    Really interested, but 2 questions:

    I've already got the TMS/Conforti chip - can anyone contrast the 2?

    Are the 19# injectors something I can easily pull from a car (and which one?) in the yard or is it something inexpensive enough that I can just grab new?

    Thanks!

    Leave a comment:


  • swooper
    replied
    I added my name to the #38 on the master list on Friday, but it looks like it got cut out, so I'm adding it again. Looking forward to getting and installing the chip.

    MASTER LIST:

    1. Kilomph - r3v (PAID)
    2. Alkasquawlik - r3v (PAID)
    3. Libelle - (PAID)
    4. Davey - bfc ---- OUT
    5. 1995M3LTW - bfc (possibly 2)
    6. Alkasquawlik's brother - (for a 528e if possible)
    7. hi its me alec - bfc
    8. E30fiend - r3v (PAID)
    9. kamotors - r3v
    10. z31maniac - r3v (PAID)
    11. VacMan (paid?)
    12. Vonkamp M42/r3v (PAID)
    13. CDBE30 - bfc (PAID)
    15. hottnikkz - bfc (PAID) (2 chips)
    16. driz - r3v (PAID)
    17. DragonOrta - r3v (PAID)
    18. blkbox - r3v (PAID)
    19. drivnovrdaedge- r3v (PAID)
    20. heathy - bfc (PAID)
    21. RecycledTeen - r3v (PAID)
    22. e30 Luv - r3v/m42club (PAID)
    23. BMWManiac - bfc/m42club (PAID)
    24. Chip - r3v (PAID)
    25. Cactusjacks1 (PAID)
    26. robrez - r3v (PAID)
    27. Ryan239 - r3v (PAID)
    28. ca993tt - R3V (PAID)
    29. e30lyf - r3v (PAID)
    30. mikesjo - r3v (PAID)
    31. brn2ply7 - r3v
    32. 36brua R3v (PAID)
    33. atle36m3 - bfc/r3v (PAID)
    34. My73bimmer - R3v (PAID)
    35. twothrees-r3v (paid)
    36. danny325is (paid)
    37. rpob5t - bf.c (paid)
    38. Mless5 - r3v (paid)
    39. justin_l_ - r3v (paid)
    40. Kristeun - r3v (paid)
    41. 91//cabrio r3v (paid)
    42. Ross Brentwood - r3v (paid)
    43. swooper r3v (paid)

    Leave a comment:


  • Alkasquawlik
    replied
    Originally posted by MarkD
    That's great. What did your friend with the Mini think? I'm going to send out refunds in an hour, but only the first 25 today and then the rest in a day or so.

    Mark
    He was shocked that I kept up with him like that. We're good friends and all so theres no hard feelings between us but after we got out of the cars and were talking and laughing about it he said "All through first I was scared you would pull on me".

    Got my refund

    Leave a comment:


  • applecran
    replied
    add me to the list. I just installed mine last night.

    Leave a comment:


  • rwh11385
    replied
    Wow, this is an impressive group buy. Congrats Mark.

    Things aren't fortunately as simple with a 98 BMW 540iA, are they? Oh well.

    Leave a comment:


  • MarkD
    replied
    Originally posted by Dozyproductions
    this has to be one of r3v's most successful group buys!
    Yes it was, but I assume a certain number of sales came from the other 2 or 3 boards it was posted on. Most people used the R3V GB code so it's hard to track where the sales came from.

    Leave a comment:


  • Dozyproductions
    replied
    this has to be one of r3v's most successful group buys!

    Leave a comment:


  • MarkD
    replied
    Originally posted by Alkasquawlik
    I installed mine today, it was a bit of a PITA, but I got it done.
    I feel the difference, but haven't really been able to push it.
    Did a run with my friend who has a modded 06 Mini Cooper S and I was only a car length behind him, which suprised me alot.

    Drove around tonight, you can really feel the difference in torque and response.
    That's great. What did your friend with the Mini think? I'm going to send out refunds in an hour, but only the first 25 today and then the rest in a day or so.

    Mark

    Leave a comment:

Working...