big waste of space:
Speaking of cnc programs, some of you (Ely especially) might be interested to see the g-code for this part. So far, this is only the first operation, where the part gets turned from 2" 6061 bar. The second operation is drilling the big hole in the bottom, the third op is the set screw hole, and the last op is the shift pattern.
Speaking of cnc programs, some of you (Ely especially) might be interested to see the g-code for this part. So far, this is only the first operation, where the part gets turned from 2" 6061 bar. The second operation is drilling the big hole in the bottom, the third op is the set screw hole, and the last op is the shift pattern.
Code:
% O0666 (BMW-SHIFTER-1_REV A_1OPL.NC) (OFFSET TOOL X-.375 Z-.1875 FROM TOUCHOFF ! ) N1(ROUGH FRONT) G00 G18 G40 G80 G97 G99 G50 S4000 G28 U0 / G20 W0 T202 (.1875R ROUND INSERT) G00 G54 G96 Z0.2 S1500 M03 G00 X2.3 M08 G1 X-.05 F.008 G0 Z.3 G0 X2.3 G0 Z.189 G1 X-.05 F.008 G0 Z.3 X2.3 G1 X2.2 F.006 G71 P301 Q302 U.003 W.001 F.006 G0Z.3 G28 U0 / G20 W0 M1 N2(GROOVE BACK) G00 G18 G40 G80 G97 G99 G50 S4000 G28 U0 / G20 W0 T202 (.1875R ROUND INSERT) G00 G54 X3. Z-2.701 G96 S800 M3 G00 X2.3 M08 G75 I.02 X.875 F.003 G0 X2.3 G0 Z.3 G28 U0 /G28 W0 M01 N3 (ROUGH BACK) G00 G18 G40 G80 G97 G99 G50 S4000 G28 U0 / G20 W0 T202 (.1875R ROUND INSERT) G0 G54 X3. Z-2.7 G96 S800 M3 G00 X2.3M8 G71 P303 Q304 U.003 W-.001 F.006 G0 X3. G0 Z.3 G28 U0 /G28 W0 M01 N3 (FINISH ALL) G00 G18 G40 G80 G97 G99 G50 S4000 G28 U0 / G20 W0 G0 G54 X2.3 Z.19 G96 S800 M3 G1 X0 F.015 M8 G1 Z.1875 X0 F.0015 N301 (START FRONT FINISH PATH) G99 G3 X1.3917 Z.0443 R1.7624 F.0015 X2.1495 Z-.3644 R.6875 X2.3161 Z-.8641 R1.5409 G1 Z-2.7 G1 X2.3 N302 (END PATH1) N303 (START BACK FINISH PATH) G0 Z-.8 G1 X2.3161 G1 Z-.8641 G3 X2.2896 G1 X1.3358 Z-2.59676 G1 X1.07262 Z-2.69304 G1 X1. Z-2.699 N304 (END PATH2) N305 (PART OFF) G1 X1.5 F.015 S200 G50 S1200 G1 X.05 F.002 G28 U0.M9 /G28 W0. G28 U0 /G28. W0. M30 %
Comment