widebodye30 aka EuroStop

[Luis325]

Dam ive never had any bad experience from Ary.. Everyone has told me to stay away but i always like to give people a chance and ive bought allot of parts from them and never a problem...
I have dtm carbon mirros, mtech 2 front and rear valance, evo flap, esm fender flares, and e30 Evo lip...none with any fit or finish problem... :(

[Dagamus(NM)]

As long as people give money to Ary to make awful pieces he will continue to produce them. The kits are terrible, every car I see in person with one of those shows up at the pick and pull a few months later.

Yes they require modification and still look bad when done, unfortunately the cost of unmodifying is usually higher than the cost of starting over with a new e30.

DTM fiber doesntwerks is the equivalent of bad Honda stuff and 99% of e30's equipped look just as bad as chopped up civics from the same era.

But, I think that pfeba is the only company that made proper body kits. Even the ACS and Alpina originals are missing something.

[Massimo]

I haven't bought anything from them yet but am looking at there fender flares. Seems as though people get butt hurt because the molds are not perfect.

Well if you want them perfect it will cost you more and as said before, if the price was higher you might as well buy the original thing. I have never seen a FB or CF replica fit properly, that might just be coincident, but if I ever do buy something in FB or CF I would never ever expect it to be a direct bolt on.

I give props to Ary for putting up with the shit he gets on this forum. Everyone knows that his stuff dose not match up perfect, so if you have a problem with that then go somewhere else. Man the fuck up, and stop winning like a little girl.

[Shangsta]

I haven't bought anything from them yet but am looking at there fender flares. Seems as though people get butt hurt because the molds are not perfect.

Well if you want them perfect it will cost you more and as said before, if the price was higher you might as well buy the original thing. I have never seen a FB or CF replica fit properly, that might just be coincident, but if I ever do buy something in FB or CF I would never ever expect it to be a direct bolt on.

I give props to Ary for putting up with the shit he gets on this forum. Everyone knows that his stuff dose not match up perfect, so if you have a problem with that then go somewhere else. Man the fuck up, and stop winning like a little girl.

Fiberglass maybe but cf stuff should be a good fit

[trackjunkie21]

I haven't bought anything from them yet but am looking at there fender flares. Seems as though people get butt hurt because the molds are not perfect.

Well if you want them perfect it will cost you more and as said before, if the price was higher you might as well buy the original thing. I have never seen a FB or CF replica fit properly, that might just be coincident, but if I ever do buy something in FB or CF I would never ever expect it to be a direct bolt on.

I give props to Ary for putting up with the shit he gets on this forum. Everyone knows that his stuff dose not match up perfect, so if you have a problem with that then go somewhere else. Man the fuck up, and stop winning like a little girl.

When you're paying 495 dollars for a pair of "plastic" front fenders, you would hope it fits perfect.

[acolella76]

When you're paying 495 dollars for a pair of "plastic" front fenders, you would hope it doesn't take as much massaging

ftfy, even high end CF/fiberglass body panels don't fit 100%. They take a little bit of work to get perfect.

[Massimo]

When you're paying 495 dollars for a pair of "plastic" front fenders, you would hope it fits perfect.

understandably, but we all know that DTM's stuff needs some "massaging" so don't come here and complain about it when it dose not fit perfectly. It would be nice to know why these kits are not a perfect match. That way everyone can understand why this is the way it is.

[jaywood]

I haven't bought anything from them yet but am looking at there fender flares. Seems as though people get butt hurt because the molds are not perfect.

Well if you want them perfect it will cost you more and as said before, if the price was higher you might as well buy the original thing. I have never seen a FB or CF replica fit properly, that might just be coincident, but if I ever do buy something in FB or CF I would never ever expect it to be a direct bolt on.

I give props to Ary for putting up with the shit he gets on this forum. Everyone knows that his stuff dose not match up perfect, so if you have a problem with that then go somewhere else. Man the fuck up, and stop winning like a little girl.

I disagree. Making a CF part fit as it should doesn't cost anymore $$ than making a CF part that doesn't fit.

I've made plenty of FG and CF parts. Once the mold is made every part coming out of it should be identical...and fit.

[mbonder]

This is why when it comes to exterior pieces my philosophy is oem or nothing. Pay to play, there is a reason the original pieces cost more.

Make no mistake, the business practices here are shameful.

[FunfGan]

This is why when it comes to exterior pieces my philosophy is oem or nothing. Pay to play, there is a reason the original pieces cost more.

Make no mistake, the business practices here are shameful.

Mind showing us where you get oem flairs and carbon fiber body panels?

[Massimo]

I disagree. Making a CF part fit as it should doesn't cost anymore $$ than making a CF part that doesn't fit.

I've made plenty of FG and CF parts. Once the mold is made every part coming out of it should be identical...and fit.

Then why are there so many FB and CF parts that do not fit? Not just Ary's stuff. If it is that easy then why are there so many bad kits.

[Kershaw]

being precise takes more time and costs more money. massimo, you're not crazy. lol. it applies to every field, every aspect of life.

a dtm fiberwerks cf hood ($600) is not a VAC cf hood ($1000.) that's nearly double the price.

[ohthejosh]

being precise takes more time and costs more money. massimo, you're not crazy. lol. it applies to every field, every aspect of life.

a dtm fiberwerks cf hood ($600) is not a VAC cf hood ($1000.) that's nearly double the price.

The way I see it is, if you are patient enough to save up 600 why not give it some extra time save up 400 more and buy a part thats is proven quality. I guess some folks are impatient.

[KDAWG97M3]

I understand that some parts may/may not fit 100%. They are not oem. The main issue is that Ary chooses to take my money, and not allow a return or even lend help. He knows his pieces are junk, for me to have to cut my oem trunk (e30 m3) is nuts. I have learned over the last week that he has major fitment issues with most of his stuff. Check out s14, he is not welcome there...

You get what you pay for and I hope you guys stay away. But. As long as he sells cheap pieces, people will buy. It seems he has burned more people than helped, he needs quality control and new molds. 720.00 and zero customer service.

Beware of them...

[KDAWG97M3]

The way I see it is, if you are patient enough to save up 600 why not give it some extra time save up 400 more and buy a part thats is proven quality. I guess some folks are impatient.

Said perfectly..lesson learned...my issue p, is my wife bought this for me, she surprised me.never asked for it, Ary sold her..so I had zero input. She was trying to make Xmas even better.....