Bosch 044 spec needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • goarmy
    Mod Crazy
    • Nov 2011
    • 622

    #1

    Bosch 044 spec needed

    Hey guys, does anybody know what is the correct amperage for a Bosch 044?

    I kept blowing up my fuse 11 which is a 15amp

    also I don't want to hurt my in-tank fuel pump, did you guys who use this pump had the same issue and what did you do?
  • goarmy
    Mod Crazy
    • Nov 2011
    • 622

    #2
    well, I bumped the fuse up to 30amp and now the new bosch 044 pump is dead.. I removed it and benched tested it to make sure and sure enough is dead..

    Is it really a fuse thing or the pump its self

    Comment

    • nando
      Moderator
      • Nov 2003
      • 34827

      #3
      Defective pump? I don't think the 15a fuse should have been a problem.
      Build thread

      Bimmerlabs

      Comment

      • goarmy
        Mod Crazy
        • Nov 2011
        • 622

        #4
        Just ordered another pump, and going to go back to 15amp.. By the way the pump was not to well secure as I found the two small bushing broken and the pump may have been touching the gas tank.

        Would the pump touching the chassis cause something like this?

        Comment

        • Wanganstyle
          R3VLimited
          • Apr 2010
          • 2828

          #5
          Bosch brand 044 is evil; likes to die mid race weekend

          Try using a different brand of "044" item; tre044 is a direct fit; aem should be also


          Sent from my iPhone using Tapatalk
          OBD1 M54/M52TU swap as a M50b25

          Z4 non powered steering rack fits e30



          Euro e46 2005/6 320d 6mt gearbox into E30 with M20 hardy and beck 1985 327s engine

          Comment

          • e30 gangsta
            No R3VLimiter
            • Jul 2004
            • 3877

            #6
            ditch the 044, walbro 450 intank done.

            Comment

            Working...