E30 Touring S52 / GS6-37BZ swap question...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • E30TouringS52
    Noobie
    • Jul 2021
    • 22
    #1

    E30 Touring S52 / GS6-37BZ swap question...

    Hey guys... Currently in the middle of my 93 Dayton violet Touring project. Built S52 motor / GS6-37BZ 6 speed swap. If anyone has some knowledge on what trans mounts they have used for exact engine / trans combo, would be super helpful.
    Tags: None
    • moatilliatta
      R3V OG
      • Feb 2005
      • 6121
      #2
      E36 GS6-37 6 Speed Conversion Transmission Bracket
      https://rebooteng.com/?product=e36-gs6-37-6-speed-conversion-transmission-bracket
      This part is used when converting an E36 to a 6 speed when using a ZF GS6-37 transmission that is commonly found in an E46 330. This adapter raises the rear trans mount 30mm and eliminates the need to run spacers with a E36 auto cross-member. Components are constructed of 6061 Aluminum.   **Anodized Black**


      I haven't used, but this maybe of help.

      I was up above it, Now I'm down in it ~ Entropy - A Build thread.
      @Zakspeed_US

        Comment

        • E30TouringS52
          Noobie
          • Jul 2021
          • 22
          #3
          Side note. Running the Kassel Motorsports rear trans plate / adapter FYI also. Here is a photo.
          1 Photo

            Comment

            • E30TouringS52
              Noobie
              • Jul 2021
              • 22
              #4
              Appreciate your help. I have seen that beautiful piece, but that is for an E36. Something just came to my attention tho, I remembered I have some trans mount spacers in a spare parts box in the shop. I will have to check them out once I get home.

                Comment

                • moatilliatta
                  R3V OG
                  • Feb 2005
                  • 6121
                  #5
                  The Zf320 fits and E36 and E30.. Maybe reach out to reboot?

                  I was up above it, Now I'm down in it ~ Entropy - A Build thread.
                  @Zakspeed_US

                    Comment

                    Previous template Next
                    Working...