Gearbox and props

[Moony.E30]

Hi all,

I'm currently on the search for parts to do a m52b28 swap in a 1992 1.8i convertible (M42).

If I use a 1.8is box I'll need to use a 325i propshaft. Is this the same case for the 1.8i box?

TIA

[82eye]

do any reading at all and you'll find it. if you are using the g240 box then the 325i driveshaft works. the g240 is the weakest trans used for the swap. it works but be prepared for the possibility of replacing it in the future.


read through this thoroughly:
The comprehensive DOHC engine swap thread. - R3VLimited Forums
then this:
Are you interested in doing a 24v swap? Read this! - R3VLimited Forums
and this:
E30 DOHC Swap Basics - M50, M52, M52 and S50 – Garagistic