Need help identifying wires

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Enriquez2000
    Advanced Member
    • Apr 2024
    • 152

    #1

    Need help identifying wires

    PO cut all connectors to turn signals/parking liggts in front. Ive read the wiring and am on the hunt for the bu/bk and bu/red wires... may be cut way up the line

    I did find a cut bundle of 3 wires on the passenger side that appear to be brown, green and black. I cant figure out what theae would have possiy gone to. Obviously green is key on power, brn is ground and no clure what black does.... but what would have these gone too?
  • TobyB
    R3V Elite
    • Oct 2011
    • 5168

    #2
    Beyond this


    I can offer this:

    https://www.amazon.com/Electrical-Wi...=ANK84Z5ZTQION
    https://www.amazon.com/Generator-Mul...273911&sr=8-11

    which you attach to the connection at the turn signal, (and the ground to the chassis)
    and then you go sniffing to see where it picks up the signal the loudest.
    Surprisingly effective, once you figure out the finer points of using it.

    t
    beederrbeederrbeederrrbeederrr
    now, sometimes I just mess with people. It's more entertaining that way. george graves

    Comment

    • Enriquez2000
      Advanced Member
      • Apr 2024
      • 152

      #3
      I have the etm but none of my wires match

      I was left with this on passenger... green is constant brown ground and black 🤷🏿‍♂️

      Click image for larger version

Name:	20241203_182010.jpg
Views:	113
Size:	195.3 KB
ID:	10131407

      And this on drivers

      Click image for larger version

Name:	20241203_182025.jpg
Views:	93
Size:	220.3 KB
ID:	10131408

      quite a mess

      Comment

      Working...