Front Under Tray

[markseven]

Did anyone reinstall the plastic under tray that runs across the front from fender liner to fender liner? If so, did you have to modify it a lot?

[ethrty]

makes for a PITA working on M20, im willing to bet it would be even worse with the S50

[jahnaboi]

Fits like stock with my s52. No mods necessary. I believe its a splash guard btw.

[sharky]

mine was cracked in half so I just used the fender liner parts and n**ger rigged it, i really need to get a whole piece one day or make a custom one.

[browntown]

meh, throw it away and install a skid plate. if it's intact, sell it to someone who really wants one.

[SamE30e]

My m50 pushes it down like a half inch, still fits.

[graphikg]

Mine fits. Bends down because of the pan tho.

[topdown323]

mine is currently a used oil resevoir for the leak i fixed. it drips a little to mock me.

[MR 325]

Mark, if you need one let me know.

[markseven]

makes for a PITA working on M20, im willing to bet it would be even worse with the S50

IIRC, it was easy to take off when I had the M20, but then again I have the BMP kit, no stock bumpers...

Fits like stock with my s52. No mods necessary. I believe its a splash guard btw.

Aha! Splash guard... that's what it is. I couldn't for the life of me remember what that thing was called.

meh, throw it away and install a skid plate. if it's intact, sell it to someone who really wants one.

I have the EJ Night skiddy ;)

My m50 pushes it down like a half inch, still fits.

Mine fits. Bends down because of the pan tho.

Good to know - thank you.

mine is currently a used oil resevoir for the leak i fixed. it drips a little to mock me.

ROFL!

Mark, if you need one let me know.

Matt - do want. What all do you have? I don't know if there is a difference between early and late model splash guards... my car is an '87... will the parts you have worK? I can swing by an get 'em sometime soon (the green car is going to TNG for some exhaust work).

[nando]

my car never had one.. I'd just take it out if it makes things a pain in the ass.

[markseven]

my car never had one.. I'd just take it out if it makes things a pain in the ass.

I would rather have it because right now the leading edge of the fender liner is missing, exposing the horn and ambient temp sensor. I'm sure there is no functional loss, but it just looks crappy when the car is parked with the wheel turned to the right. Also, with the BMP kit, I hate seeing the ground through the middle intake and the brake ducts. If the splash guard doesn't impede cooling to the oil pan, then I would rather have it in place.

[nando]

I have the ones on the sides (where the brake ducts attach) just not the one in the middle.

[MR 325]

Mark, I just have the undertray panel itself. It's from a late model, not sure if it's what you need but let me know.

[markseven]

Mark, I just have the undertray panel itself. It's from a late model, not sure if it's what you need but let me know.

Matt, I checked realoem to compare PN's, but couldn't find that thing... I a ritard.