What's the *best* radiator for M50?
Collapse
X
-
aaaaahhhhhhhh. will the e36 m42 sensor fit in the e30 m42 rad?Comment
-
I THINK the rads are the same just the e30 m42 has a cap covering where the level sensor would go.Comment
-
anyone know the part number for the e36 318is coolant level sensor?Comment
-
why are people using electric puller fans with plenty of room in front of the rad for a pusher?Function.
Form.
sigpicComment
-
AC Condensor. i just installed a spal puller so i can go ACComment
-
Newer version of the Mishimoto is a PITA for the 2 lines that come from the block and the Expansion tank. They are right on top of one another and make it hard to get the lines on and clamped down. I went with the Mishimoto but might have went with something else to make it easier to bleed and what not.
Originally posted by Roysneon$5 shipped?Originally posted by MarkDYou are a strange dude, I'n not answering any more posts from you.Comment
-
interesting. i have the e36 mishi rad in my 318is. the top rad hose and the overflow hose to expansion tank, are also extremely close together. also a PITA to put those hoses there with clamps.Comment
-
So are you saying no fan at all? Or just electric fan? If you've got a decent electric in there you should be fine. I've heard of a few people running no fan, but there are too many lights and traffic around me to get away with that and feel comfortable IMO.
Comment
-
I have a 12 inch puller with my m42 rad and it has kept the temp right in the middle so far but then again the car has not seen much more than 80 deg since I installed it. Probably upgrading to a mishimoto this spring.Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
-
I'm probably going to take fraudulant action and copycat that idea :D
I was going to get an E34 M5 oil cooler but they're hard to come by and I was a bit afraid of mounting it low and hitting it somewhere.
There's tons of room behind the passenger lights and I can delete the high beam on track days, as I do on the driver side for cool air intake.
New project to add to my to-do list.Comment
-
Haha, go for it :)I'm probably going to take fraudulant action and copycat that idea :D
I was going to get an E34 M5 oil cooler but they're hard to come by and I was a bit afraid of mounting it low and hitting it somewhere.
There's tons of room behind the passenger lights and I can delete the high beam on track days, as I do on the driver side for cool air intake.
New project to add to my to-do list.
Have you settled on a choice for the radiator?IG: deniso_nsi Leave me feedback here
Comment



Comment